Ring Delay & Time Saver; Switch Call Screening At The Base Or Handset On Or Off; Call Screening At The Handset - BT Graphite 3500 User Manual

Answer Settings
Ring delay & Time saver
Menu
1. Press , scroll
Redial
2. Scroll to
Calls
RInG DELAy is displayed. Press
3.
Redial
4. Scroll or
the Ring delay setting or select
Calls
Switch call screening at the base or handset on / off
When screening is switched on, you can hear your caller leaving a
message from your handset or the base, and choose to interrupt
and speak to the caller if desired. The default setting is On for the
base and Off for the handset.
Menu
1. Press , scroll
Redial
2. Scroll to
Redial
Calls
3. Scroll to either
Calls
Redial
4. Scroll or
Secrecy
5. Press to return to the previous menu level.
Calls

Call screening at the handset

If handset call screening has been turned on, when a caller is
leaving a message the display will show
To screen the call (i.e. listen to the message being recorded via the
handset earpiece or handsfree speaker), press
will show sCREEnInG.
If you want to speak to the caller, press
their message.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
9881 Graphite 3500 UG [1].indd 35
Redial
to MACHInE. Press
Ans
Menu
sETTInGs Calls and press .
Menu
Redial .
to select between 2 RInGs
Calls
TIME sAvER
Redial
to Ans MACHInE. Press
Menu
sETTInGs and press .
Calls
or
Bs sCREEnInG Hs
Redial
to choose On or OFF. Press
Calls
sCREEn?
Menu
.
and 9 RInGs for
Menu
and press .
Menu
.
Menu
sCREEnInG. Press .
Menu
.
Menu
, the display
as they are leaving
Ring delay
Ring delay sets the number of times
your BT Graphite 3500 will ring
before the answer machine picks
up your call and starts playing the
outgoing message. You can change
the Answer Delay setting to between
2-9 rings or Time Saver. The default
is 5 rings.
For compatibility with BT 1571
or another voicemail service it is
advisable to keep to the default
setting or lower.
Time saver
When you ring in to access your
messages remotely, if your answering
machine is set to time saver and you
have new messages it will answer after
2 rings, if you do not have any new
messages, it will answer after 6 rings.
This means you can hang up knowing
you have no new messages, saving
you time and the cost of the call.
35
13/9/10 16:30:29