Call Waiting; To Use Call Waiting; Activate/Deactivate Call Waiting - BT Graphite 3500 User Manual

Call Waiting

With Call Waiting, during a call, if another caller is trying to reach
you, you will hear a soft beep every 5 seconds.
If you have also subscribed to a Caller Display Service, the caller's
number (or name if stored in the Phonebook) will be shown on
the display for 20 seconds, after this time the display will return to
your first caller's details.
Instead of the engaged tone, the second caller will hear an
announcement to hold as you are aware that they are waiting.

To use Call Waiting

To answer the second call, without disconnecting from your
first caller:
1. Press . The first caller will be put on hold.
2. Press again to return to the first caller, and then press it
each time you want to switch between the two callers.
To disconnect the first call and take the waiting call:
1. Press to end the current call. The handset will then ring.
2. Press and continue your conversation with the
second caller.
Activate/de-activate Call Waiting
Menu
1. Press , scroll
Redial
2. Scroll to
Calls
Redial
3. Scroll or
Menu
Calls
press . This will send an update to the network.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
9881 Graphite 3500 UG [1].indd 28
Redial
to BT sERvICEs and press
Calls
Menu
CALL WAITInG. Press .
Redial
to choose either
ACTIvATE
Calls
You must subscribe to your network's
Call Waiting service for Call Waiting to
work. A fee may be payable.
Menu
.
or DEACTIvATE,
28
13/9/10 16:30:26