Nu-Flame N1 Use & Maintenance Instructions page 7

INSTALLATION & SERVICING INSTRUCTIONS
Due to the many pan sizes and shapes there is not an exact pattern and these layouts are intended as a guide to illustrate the
general principles. On the base and second layer it is important to leave spaces of at least 10mm between the simulated pebbles
to ensure good secondary aeration. Do not overload the fire as it will spoil the appearance of the fire and cause sooting. Do not
put more than 2 layers of simulated pebbles on any fire. Depending on the size of the fire it might not be necessary to use all the
simulated pebbles supplied. Do not add further simulated pebbles.
LARGE
MEDIUM
SMALL
In the case of burners with the alternative central pilot position the front base pebbles must be positioned further to the left and right to
ensure the pilot cut out is clear.
Do not cover any part of the gas outlet slots with the base layer of simulated pebbles.
In the case of burners with the alternative central pilot position the front base pebbles must be positioned further to the left and right to
ensure the pilot cut out is clear.
LAYOUT FOR SIMULATED PEBBLES
Page 7 of 10
(
continued)