ECS K7S5A Pro User Manual page 9

Table of Mainboard Components
Label Component
AGP1 Accelerated Graphics Port slot
ATX1 Standard 20-pin ATX power connector
AMR1 Audio Modem Riser slot
AUDIO2 Front panel MIC/Speaker Out header
BAT1 Three volt realtime clock battery
CD1 Primary CD-in connector
CD2 Secondary CD-in connector
CPUFAN Cooling fan for CPU
CPU Socket Socket 462 for AMD Athlon/Duron CPUs
DDR1 ~ DDR2 Two 184-pin DDR memory modules
FLOPPY Floppy disk drive connector
FP1 Panel connector for case switches and LEDs
IDE1 Primary IDE channel
IDE2 Secondary IDE channel
IR1 Infrared cable header
JP1 Clear CMOS Memory Jumper
JP2 Onboard LAN LED Connector
JUSB1 ~ JUSB3 Connectors for front panel USB ports
PCI1 ~ PCI5 Five 32-bit add-on card slots
SDR1 ~ SDR2 Two 168-pin SDRAM memory modules
SPK1 Internal speaker connector
SYSFAN System Fan connector
WOL1 Wake On LAN header
This concludes Chapter 1. The next chapter explains how to install the main-
board.
5