Optional Paper Tray Two Service Check - Lexmark Optra E 4026-0XX Service Manual

4026-0XX

Optional Paper Tray Two Service Check

Check the following before servicing tray two:
•
Be sure tray one is working correctly.
•
Be sure the second paper tray is correctly installed and the sec-
ond paper tray connector on the base printer properly contacts
the second paper tray connector in the second paper tray.
•
Be sure the second paper tray is selected in the user's applica-
tion and no other application is on the selected port.
•
Be sure the base printer and tray two connectors are not dam-
aged.
•
Be sure the second paper tray drive gear in the base printer
operates correctly.
•
Check the paper feed frame assembly for any obstruction or
damage in the area of the second paper tray feed slot that can
cause the paper to catch or jam.
Note: Only paper can feed from tray two. Envelopes, label sheets,
and transparencies must feed from tray one or manual feed.
Wrinkled or damaged paper
FRU
1 Paper
2 Paper Path
Paper fails to leave Paper Tray Two - Solenoid never picks
FRU
1 Paper
2-28
Action
Check the paper supply for wrinkled, damaged
or out of specification paper. Correct as neces-
sary.
Check the paper feed lift plate assembly, paper
empty flag, paper separators, paper feed rollers
or anything in the paper path that might catch
the paper or cause the paper to wrinkle.
Action
Check the paper supply for any paper that may
cause a problem.