Step 4: Install Memory And Option Cards; Removing The System Board Access Cover - Lexmark C750 Setup Manual

Step 4: Install memory and
CAUTION!
or option cards sometime after setting up
the printer, turn the printer off and unplug
the power cord and any other cables
before continuing.
22
Install memory and option cards
option cards
If you are installing memory
Removing the system
board access cover
You can customize your printer memory
capacity and connectivity by adding
optional cards or hard disk.
1
Locate the access cover on the
back of the printer.
2
Loosen the four screws at the top
of the access cover, but do not
remove the screws completely.
3
Remove the four screws at the
bottom of the cover.
4
Slide the cover down to remove it.
5
Use the illustration on page 23 to
locate the connector for the card
you want to install.