Advertisement
6. Attach the duct to the one way valve, and connect it to
the kitchen outlet vent (see pic 4)
7. Ensure that the wall the hood is to be installed on is
sufficiently sturdy to carry the weight of the hood. It
should be mounted level for best performance
8. Do not connect to a common vent with any other
appliances such as a gas heater, water heater,
washer/dryer, etc.
9. The duct should not be bent more than120° from the
one way valve outlet in the kitchen vent
10. Make sure that the electrical cord is not in contact with
sharp edges of the appliance
11. Be sure that the plug is accessible after installation
5 | P a g e
saturated
Electrical Diagrams
Perfekt‐Insert‐24, Perfekt‐Insert‐30
Perfekt‐Insert‐36
grease residue and
replace after cleaning
115V, 60Hz
L2
115V, 60Hz
L2
10 | P a g e
Advertisement
