Step 11: Installing Output Options - Lexmark C782n Setup Manual

Step 11: Installing output options

If you purchased an output option (output expander, 5-bin mailbox, or StapleSmart™ finisher), follow these steps:
1
Remove the top cover from the printer.
You will not need the cover when the output option is attached. Store the cover; it will be needed if you remove the
output option.
2
Remove the option from the box, and follow the installation setup instructions that came with the option.
3
Place the tips of the wire bail into the ends of the plastic bracket so that the bail curves downward.
The wire bail came with the printer and rests in the standard output bin when installed.
4
Follow the instructions that came with the option to attach the plastic bracket to the output expander, 5-bin
mailbox, or StapleSmart™ finisher.
Step 11: Installing output options
Step 11: Installing output options
21
1
2