GreenWorks 21262 Owner's Manual page 10

ASSEMBLy INSTRUCTION
AUXILIARY HANDLE (
W A R N I N G
To avoid injury, adjust the auxiliary handle for optimum control and balance. Do not overreach
when operating grass trimmer/edger. Keep proper balance atall times for better control of the
tool in unexpected situations.
1. Turn the auxiliary handle adjustment knob (1) counter-clockwise several turns to loosen the
auxiliary handle (2).
2. Adjust the handle position to provide the best level of balance and control for the operator.
3. Securely lock the handle in position by turning the knob clockwise.
4. Before operating the grass trimmer/edger , make sure the auxiliary handle is tightly locked into
position.
CUTTING LINE (
See Figure 4.)
A spool of monofilament cutting line is pre-installed on the grass trimmer/edger. When the cutting
line needs replacing, insert a new spool.
To avoid injury, always remove the battery pack before installing the guard, changing a cutting
line, or making any adjustments.
To remove the spool:
1. Disconnect the battery from the string trimmer.
2. Turn grass trimmer/edger over to access the spool.
3. Remove spool cover by pressing on two tabs parallel to each other on the side of the cover (2).
4. Remove the spool (1) from the spool housing (3).
See Figure 3.)
(2)
(1)
Fig. 3
10