Switching The Seek Mode; Tuning In Strong Signals; Switching The Reception Mode - Pioneer AVIC-Z120BT Operation Manual

HD Radioä reception
3 Touch [Start] to begin a search.
BSM begins to flash. While "BSM" is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys "Preset 1"
to "Preset 6" in order of their signal strength.
When this is complete, "BSM" stops flashing.
p To cancel the storage process, touch
[Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved.

Switching the seek mode

You can select the method of seek tuning.
on the "Digital Radio" screen.
1 Touch
2 Touch [Seek] to select the desired set-
ting.
! All:
Seeks stations from both analog and digital
broadcasting.
! HD:
Seeks from digital broadcasting only.
p If you select "HD" on this setting while
[Blending] is set to "Analog", the setting
on [Blending] turns to "D/A Auto" automa
tically.

Tuning in strong signals

Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
on the "Digital Radio" screen.
1 Touch
2 Touch [Local].
3 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
4 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are four levels of sensitivity for FM and
two levels for AM:
FM: 1 2 3 4
AM: 1 2
p The FM "4" (AM "2") setting allows recep
tion of only the strongest stations, while
lower settings let you receive weaker sta
tions.

Switching the reception mode

If a digital broadcast reception condition gets
poor, the tuner automatically switches to the
analog broadcast of the same frequency level
in default. If you want to prevent a frequent
automatic switching, switch this setting to
[Analog].
on the "Digital Radio" screen.
1 Touch
2 Touch [Blending] to switch the recep-
tion mode.
! Analog:
Receives analog broadcasting only.
! D/A Auto:
Automatically switches to the analog broad
cast of the same frequency level as the digi
tal broadcast.
p If you select "Analog" on this setting while
[Seek] is set to "HD", the setting on [Seek]
turns to "All" automatically.
Chapter
16
89
En