Step 7: Load Paper; Loading The 500-Sheet Trays - Lexmark C 760 Setup Manual

Step 7: Load paper

Note:
When loading specialty media
such as transparencies or card stock,
refer to the User's Guide on the
publications CD.
Source Paper sizes supported
500-sheet trays Letter, A4, A5, Legal,
Executive, JIS B5, Folio
Statement
2000-sheet tray Letter, A4, A5, Legal,
Executive, JIS B5
Multipurpose Letter, A4, A5, Legal,
feeder Executive, JIS B5, Folio,
Statement, Universal
7¾, 9, 10, DL, C5, B5, other
a
Supported as selected paper with tray size sensing turned off in the appropriate trays.
b
When selected, the page is formatted for 215.9 x 355.6 mm (8.5 x 14 in.) unless otherwise specified.
c
Load narrow media with the length in the feed direction (portrait).
d
If you print large quantities of labels or other glossy specialty media, you should purchase a web oiler field upgrade kit. Contact your
Lexmark Representative for more information.
e
Capacity varies with media weight and construction. Refer to the User's Guide for more information.
f
Size can vary from 98.4 x 62 mm to 176 x 250 mm (3.87 x 6.38 in. to 6.93 x 9.84 in.).
Loading the 500-sheet
trays
Warning:
Never remove paper trays
while a print job is printing. It could
damage the tray or the printer.
The following table lists page numbers where you can find loading instructions for the
standard and optional trays, as well as for the multipurpose feeder.
Paper types supported
Paper, transparencies,
a
, labels, card stock
a b,c
, Universal
Paper
Paper, transparencies,
labels, card stock
b,c
f
Envelopes
Follow these instructions to load any of the 500-sheet trays.
1
2
3
4
Capacity
• 500 sheets of 20 lb paper
• 350 transparencies
• 200 sheets of labels or card stock
• 2000 sheets of 20 lb paper
• 100 sheets of 20 lb paper
• 75 transparencies
• 40 sheets of labels or card stock
10 envelopes
Remove the tray from the printer and place it on a flat, level surface.
Squeeze the front guide lever and slide the guide to the front of the tray.
Squeeze the side guide lever and slide the guide to the correct position for the
size paper you are loading.
Icons along the back of the tray indicate paper sizes.
Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges of the stack on a level
surface.
Load paper
26
Go to page...
e
26
e
d,e
e
27
e
29
e
d,e