Table of Contents
Advertisement
D a b M o D e
Telescopicaerial
Please make sure that the aerial on the back of the BEAM is
fully extended and adjusted before you switch to DAB mode
for the first time (a vertical position is recommended)�� This
will ensure that the maximum signal strength is available
when the BEAM automatically begins to scan for DAB radio
stations�� Extending the aerial also ensures the best possible
sound quality��
SelectDABmode
1��
T ouch 'DAB' on the main menu screen or select 'DAB' using
the mode button and the
'Select' on the remote control��
The first time you select DAB mode your BEAM will
automatically begin to scan for DAB radio stations��
'Scanning������ ' will be displayed and a progress bar will show
the progress of the scan and the number of stations found
during the scan will also be displayed�� When the scan is
complete your radio will select the first available station and
begin to play��
BEAM.indd 15
or
buttons followed by
ChangingDABstations
1�� Touch the
or
on the right hand side of the screen
to scroll through the available stations and touch the
station name you would like to listen when it is displayed��
Alternatively you can use the
remote control and press 'Select' �� Your radio will tune to that
station and begin to play��
ScanningforDABstations
With DAB radio, additional stations and services regularly
become available so it's a good idea to carry out a manual
scan every now and then to make sure that you have the
most up to date station listing stored within the memory of
your BEAM�� If you have moved your radio to another location,
eg: if you go on holiday, then it's also a good idea to
carry out a manual scan��
1�� If you are not already in DAB mode, go to DAB mode��
�� Touch
at the bottom of the screen in the middle,
to display the DAB menu options��
15
or
buttons on your
19/9/11 12:44:52
Advertisement
Table of Contents
