Table of Contents
Advertisement
Step6: If your network does have security enabled the radio
will prompt you to enter your WPS connection type�� You can
select from:
Pin: Touch this option to display a PIN code to be entered
into your wireless access point or router��
Push button: Touch this option if your wireless access point
or router has a push button function to add new devices to
your network��
no WPs: Touch this option to enter the relevant Wired
Equivalent Privacy (WEP) or Wi-Fi Protected Access (WPA)
code or pass phrase�� WEP/WPA pass codes are case sensitive��
Note:The security details must be the same as those saved in
the wireless access point or router, which would have been
set up by the person who installed your wireless network��
BEAM.indd 9
Keyentry
1�� To enter a code or pass phrase, touch each letter on the
screen��
Touch the
to display CAPITAL letters��
Touch
to display digits�� Touch this key twice more to go
back to displaying letters��
If you select a character or digit in error, just select the
delete each one��
�� When you have selected the final letter or digit of your pass
code, touch
to confirm��
3�� Your radio will now connect to your selected network and
after a short delay the following screen will be displayed:
4�� Touch 'OK' to exit this screen and go to the Main menu��
9 9
to
19/9/11 12:44:48
Advertisement
Table of Contents
