Printing Transparencies; Printing A Banner - Lexmark 1500 Series User Manual

Note: To prevent smudging, remove each iron-on transfer as it exits, and let it dry before stacking.
Related topics:
•
"Using the Page Setup dialog" on page 49
•
"Using the Print dialog" on page 50

Printing transparencies

1
Load transparencies.
2
Customize the settings as needed in the Page Setup dialog.
a
With a document open, click File
b
From the "Format for" pop-up menu, choose 1500 Series.
c
From the Paper Size pop-up menu, choose a paper size.
d
Choose an orientation.
e
Click OK.
3
Customize the settings as needed in the Print dialog.
a
From the software application, click File
b
From the Printer pop-up menu, choose 1500 Series.
c
From the third pop-up menu from the top, choose Quality & Media.
•
From the Paper Type pop-up menu, choose Transparency.
•
Select a print quality.
Note: Higher print quality settings result in better quality documents but may take longer to print.
d
Click Print.
Note: To prevent smudging, remove each transparency as it exits, and let it dry before stacking. Transparencies
may require up to 15 minutes to dry.

Printing a banner

1
Remove all paper from the paper support.
2
Tear off only the number of pages needed for the banner (up to 20 sheets).
3
Place the required stack of banner paper on a flat surface behind the printer.
4
Load only the first page of banner paper into the paper support with the leading edge of the banner going into
the printer.
5
Adjust the left and right paper guides.
Page Setup.
Print.
W
I
PR F
IN TIN I
G
Printing
25