Advertisement
(6) Adjust the height of the four casters to align the
mark on the lever with the screw hole on the
finisher.
Screw hole
Mark
(7) To install the covers and other parts removed
in step (2) to (5), reverse the removal proce-
dure.
(8) Connect the two connectors removed in step
(1) and secure the cord with a cord clamp.
(9) Install the finisher on the machine.
Y111090-1
20. Insert exit tray into the sub tray paper exit slot on
the finisher.
A0HRIXC036DA
21. Connect the hookup cord of the horizontal trans-
port unit to the machine.
A0HRIXC043DA
22. Reinstall the user's guide holder which has been
removed in step 2, to the position shown.
E-15
A0HRIXC037DA
A11PIXC018DB
A0HRIXC042DA
Installation Manual
Advertisement
