Strong SRT 8112 User Manual page 24

Video resolutions:
Decoding & Video out:
Aspect ratio:
Audio Decoder
Audio support:
MPEG MusiCam Layer 2
Sampling rate:
Audio mode:
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories
Tuner
Front End:
Input frequency range:
Loop through frequency range:
Input signal level:
Memory and System
Flash memory:
SDRAM:
Multimedia
Video playback:
Audio playback:
Picture view:
*STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG
codec formats are supported).
Connectors
ANT IN - IEC Female; TO TV - IEC Male
TV SCART (RGB, CVBS, Audio L&R)
HDMI
S / PDIF (coax.)
3.5 mm stereo audio jack (audio left/right)
USB 2.0 port: 5 V/800 mA (max.) supported
general Data
Supply voltage:
Power consumption:
Power consumption in standby:
Operating temperature:
Storage temperature:
Operating humidity range:
Size (WxDxH) in mm:
Net-weight:
20
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / By Native TV /
By source
PAL
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
AAC/Dolby Digital Plus*/AC3/PCM
32, 44.1, 48 KHz
Stereo, Mono
DVB-T, UHF & VHF Tuner
174 – 230 MHz (VHF) and 470 - 862 MHz (UHF)
47 - 862 MHz
-20 ~ -84 dBm
4 Mbytes
64 Mbytes
MPEG-1 and MPEG-2 encoded (mpg), VOB, AVI, MKV, TS, M2T,
M2TS, MPEG-4 and MOV*
MP3 and OGG *
BMP and JPEG *
220 - 240 V AC (SMPS), 50/60 Hz
3.40 W (typ.), 12.00 W (max)
0.32 W
0 ~ +40° C
-30 ~ +80° C
10~85%, RH, Non-condensing
138 x 110 x 40
0.33 kg
PART 1 • English