Table of Contents
Advertisement
3.5 Connecting to a Digital Audio Amplifier and Tv
using HDMI
By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy
the best possible sound quality and multi-channel audio (depending on broadcast). Connect the
HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output of the
amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes.
3.6 Connecting to an analogue Audio Amplifier
Use the 3.5 mm jack to connect your receiver to the analogue input of your Hi-Fi or audio amplifier
with a 3.5 mm jack to RCA cable for achieving best possible analogue audio quality.
3.7 Connecting a USB storage device
It is recommended to use USB 2.0 storage devices or higher for recording and play back of TV
programmes or HD movies.
Timeshift/recording and playback only works properly when a fast USB storage device such as a
USB2.0 HDD is connected to the receiver. Timeshift/recording and playback of HD content requires a
sufficient read/write speed of the used USB storage device.
4.0 STARTIng UP FoR THE FIRST TIME
When you use your receiver for the first time, the Welcome "Easy install" menu appears. Use pq to
move the highlight to the setting you wish to alter and use tu to change values. Start by selecting
your language using tu. Once you have selected your language, press q to move the highlight to
the next item and use tu to change.
Language
Region:
Subtitle:
Aspect Mode:
Scan mode:
noTE:
Connection:
* Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely subtitles can be activated via Teletext
if available.
When all settings have been made, move the highlight to ok and press ok to continue.
6
Here you can choose your language.
Select your region where this receiver is used.
Select Normal to display subtitles per default, Select Hard of Hearing to show
HoH subtitles per default. Select Off to hide subtitles per default.*
Use this option to select the aspect ratio of your TV and the preferred
conversion method. Options are:
Auto (automatic detection of aspect ratio), 4:3 Panscan (Displays 16:9
widescreen broadcasts full screen on your 4:3 TV), 4:3 letterbox (black bars
on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9
TV sets).
Select All to store scrambled and free to air channels or select Free to store
only free to air channels.
Scrambled channels cannot be viewed with this receiver.
Use this option to adjust the established connection to your TV set. Select
HDMI or TV SCART.
PART 1 • English
Fig. 5
Fig. 5
Fig. 6
Hide quick links:
Advertisement
Table of Contents
