Local Time Setting; Timer Setting - Strong SRT 8112 User Manual

PART 1 • English
Aspect Mode:
Connection:
Digital Audio Output:
*Dolby and the double-D symbol are registered trademarks of Dolby Laboratories

7.3.3 local Time Setting

Here you can set up your region and time zone.
Region:
GMT Usage:
GMT Offset:
Daylight Saving:
Date:
Time:
Time Display

7.3.4 Timer Setting

This menu allows you to set up to 8 timed events for recording or waking up the receiver.
Use pq to select Timer Setting from the System Setup menu and press ok to enter.
The receiver will display a list with 8 timers, followed by their respective status. Select the timer you
wish to set or change with pq and press ok to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode:
By Source (automatic detection of video resolution offered to the receiver),
By Native TV (automatic detection of maximal resolution of TV screen), and
manual selections 480i, 576i up to 1080p Please use a setting that matches
your TV's specifications. After a selection is made, you will be asked to
confirm. Selection above 576i is only applicable on HDMI output.
Use this option to select the aspect ratio of your TV and the preferred
conversion method. The options are:
Auto (automatic detection of aspect ratio), 4:3 Panscan (Displays 16:9
widescreen broadcasts full screen on your 4:3 TV), 4:3 letterbox (black bars
on top and under the picture on a 4:3 TV) and 16:9 (use this setting for 16:9
TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV
SCART. If connection type HDMI is selected, then only the CVBS signal is
available on the TV SCART.
Toggles between PCM and Bitstream output. When PCM is selected, all digital
audio will be converted to stereo audio. Bitstream enables you to listen or
transfer Dolby ® Digital/Dolby
a Home entertainment system (for example) through coaxial S/PDIF.
Use tu to select the region you live in.
Set to By Region for broadcaster defined time, User Define to select manual a
GMT zone or to Off to input time and date manually.
Allows you to adjust the time zone you live in. This option is only available
when GMT Usage is set to User Define.The GMT Offset range is "-11:30 ~
+12:00", increasing by half hours progressively. The cities matching the set
GMT Offset are displayed at the bottom of the screen.
Select Off or On to add one hour extra for summer time during the summer.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the date. Press EXIT to proceed.
Date and Time settings are available only when GMT Usage is set to Off. Use
the 0~9 buttons to enter the time. Press EXIT to proceed.
Select On to display time on screen, Off to remove.
Choose between Off (Timer inactive), Once, Daily (Timer will be executed
every day, same time) or Weekly (Timer will be executed every week, same
® Digital Plus* audio to the TV via HDMI or to
13