Lexmark N4000e User Manual page 9

What the list shows...
Multiple print servers
Your print server with the MAC
address appended.
For example:
Lexmark_N4000e_0020000035D0
What this means...
More than one print server was
found on your network.
Your print server is configured.
Understanding the Setup Utility software
9
What to do next...
1 Identify which print server is the
one you are setting up by
matching the MAC address
MAC address
to the twelve characters
appended to the print server
name in the list.
For example:
Lexmark_N4000e_
0020000035D0
2 Select your print server.
3 Match the way your print server
is listed on the screen to one of
the "What the list shows...."
items below, and then follow the
"What to do next..." instructions
for that item.
Is the print server name followed
by a printer name?
For example:
Lexmark_N4000e_0020000035D0
—E320
If so, follow the "What to do next..."
instructions for "Your print server
followed by a printer name."
If not, do the following:
1 Make sure that the printer is
turned on and that the print
server is properly connected to
the printer (check the USB
cable).
2 Select My print server/printer
is NOT shown in the list.
3 Select the first radio button.
4 Click Next to search the network
again.