Summary of Contents for Merrithew Health & Fitness The Cross-Bow
Page 1
The Cross-Bow ™ OWNER’S MANUAL Please review this important assembly, safety and warranty information about your new Merrithew Health & Fitness Cross-Bow and keep it handy for future reference. ™ ™...
AND WARNINGS COULD RESULT IN SERIOUS INJURY. Ensure that all nuts, bolts and screws are securely fastened. It is impossible to predict every situation and condition that can occur while using the Cross-Bow. Merrithew Health & Fitness ™ Monthly makes no representation about the safe use of the Cross-Bow Check wear on stud knob and pop-up pin and under all conditions.
7/16" open wrench. It is recommended to keep the original bolts. 4 Place the Cross-Bow as shown aligning the bolt holes. 5 Attach Cross-Bow with the new bolts and washers [14, 15] provided. Tighten using the adjustable or 7/16" open wrench.
Page 5
Installation 1 Lower the footbar [8] by adjusting the swing arm [11] of the Reformer to cradle position #4 [12]. 2 Slide the rods of the Jumpboard Frame [6] (with Cross-Bow attached) completely into the receptacles [9] in the wooden standing platform.
Warranty MERRITHEW HEALTH & FITNESS DISCLAIMER OF IMPLIED WARRANTIES THE CROSS-BOW AND LIMITATION OF REMEDIES ™ Merrithew Health & Fitness warrants that this equipment is free of Repair or replacement of defective parts is your exclusive remedy under ™ manufacturing defects in workmanship and materials, subject to the terms the terms of this limited warranty.
Page 7
Expand Your Repertoire Choose from a variety of cutting-edge DVD titles Increase your expertise with Reformer instruction. These DVDs feature the Cross-Bow and other Reformer Accessories. ™ For more information on our full range of DVDs, accessories and equipment, visit merrithew.com.
Page 8
IMPORTANT Please keep this manual in a safe place. 2200 Yonge Street, Suite 500, Toronto, ON, M4S 2C6 phone 416-482-4050 fax 416-482-2742 email equipment@merrithew.com website merrithew.com...
Need help?
Do you have a question about the The Cross-Bow and is the answer not in the manual?
Questions and answers