Use External Housing - QMD 37x WDR Install Manual

6.4
To operate speed dome cameras and maintain all functions in normal in severe
temperature conditions, i.e. below -10
required
Inside the housing, the mounting base (item # 3 in the
accessory list) is already built before it leaves factor.
picture on the right)
Installation Procedure
Take the bracket
1.
put it on the target place and fix it with the
supplied screws (total of 4)
Take the cover-screw off the bracket, and
2.
remove the cover from bracket
Attach the housing and lock it to the bracket.
3.
Tight them on with screws
Put the cables in the trench of bracket, and
4.
all connectors come out through the cable
outlet. Then put cover and screw back.
Load the camera to housing from the
5.
opening of housing. Be sure the connectors
are well mated and then rotate the camera
to lock it in position
Put the safety screw in locking position and tight it
6.
.
QMD Install manual D06400210010G PTZ Dome Camera

Use External Housing

(supplied with the housing)
Finished device
o
C or above 45
(see
,
Remove this screw
o
C, external housing is
34
.