Installing A 250- Or 500-Sheet Drawer - Lexmark T64x Setup Manual

Installing a 250- or 500-sheet drawer

The 250- or 500-sheet drawer attaches under the printer and optional duplex unit. The printer automatically recognizes any
drawer that is installed.
A drawer consists of a tray and a support unit. The 250- and the 500-sheet drawers are installed the same way.
1
Remove the tray from the support unit. Remove all packing material and tape from the support unit and the tray.
2
Place the tray in the support unit.
3
Place the support unit on the stand.
You can attach a label to the tray to indicate the tray number.
Labels
4
If you have additional drawers, place them on top of any installed drawer.
The tab, round peg, and square hole on top of any drawer help you position the duplex unit so the edges are
aligned properly. Make sure it is securely in place.
Low profile stand setup
Tab
Installing a 250- or 500-sheet drawer
19
Square hole
Round peg