Advertisement
Router—WAN 1 (Example for China Unicom)
And Click "Save Button", then Click "Reboot Button".
Notes: This setting is just for Network Provider China Mobile. Please confirm with your Network
Provider for the right local parameters.
Need confirm the following parameters:
1. Dial number – for china unicom, it's #777
2. Username – for china unicom, it's card
3. Password – for china unicom, it's card
4. APN access code – for china mobile, there is no APN access code
The following table is china common setting from different ISP
Dial-up
ISP
Number
China mobile
*99***1#
China unicom
#777
Note: "OK" must capital letters in Extra initialization command
4.6 Reboot Router after configuration
The router must be rebooted after configuration. Then it will dial to the internet automatically.
4.7 Connect Computer to internet via Router
There are three ways:
A. Connect the computer to Router RJ45 interface directly via RJ45 cable
B. Connect the Switch/Hub to the Router RJ45 interface.
Then connect the computers to the Switch/Hub
Add: Bld22., Longxi Garden, Nonglin RD., Futian District, Shenzhen, 518000, China
Username
password
wap
wap
CARD
CARD
E‐Lins Technology Co.,Limited
Tel: +86‐755‐83700465 E‐mail: sales@szelins.com www.szelins.com
E-Lins EV700 Series Router Quick Start
AT Strings initialization commands
AT+CSQ OK AT+CGDCONT=1,"IP","CMNET" OK
AT+CSQ OK AT\&D2 OK
Advertisement
