Mode Selection - Sharp VC-A230X Operation Manual

Mode Selection

You can set the basic functions listed in the table below on the MODE selection screen.
PREPARATION
*Turn on your TV and select the video channel and turn on the VCR. (See page 5, item 3.)
[Blue
Back]
[Auto
Rental]
SET
press SET.
press v.
(For details, see Colour Mode on page 18.)
AUTO Usually select AUTO mode.
PAL ,.,.,..... Strict PAL colour mode.
press v.
AUTO Usually select AUTO.
A blue screen will appear when your VCR receives no TV signal or an
unrecorded tape is played back.
OFF Select OFF if the screen turns blue due to weak TV signal reception, or
playback of a poorly recorded tape.
then press v.
(For details, see Auto Rental Mode on page 19.)
press v.
(For details, see Auto Repeat on page 26.)
press v.
(For details, see Intelligent Timer Recording (JUST
REC) on page 26.)
15