Table Of Contents; Introduction; Applications; Functions And Controls - Strong SP-60A Operation Manual

CONTENTS
Introduction ...............................................................1
Applications ...............................................................1
Functions and controls .......................................... ......1
Accessories.............................. .................................1
Hazards and risks .....................................................1-2
Operation ................................................ .................2
Care and preventive maintenance ...............................3-4
Specifications.............................................................5
Transportation............................................................6
Trouble shooting.........................................................6
Explosive Diagram & Part Lis t...................................8-11
Warranty..................................................................12
Maintenance Record ........................................... ......12

INTRODUCTION

your selection of our equipment.
We have taken care in the design, manufacture and testing of
this product. It is covered by a six m onth warranty. Should
service or spare parts be required, prompt and efficient service
is available from our company or our agent.
General Safety instruction for the Operation of
Power Equipment.
The goal of our company is to produce power equipment that
helps the operator work safety and efficiently. The most
important safety device for this or any tool is the operator. Care
and good judgement are the best protection against injury. All
possible hazards cannot be covered here, but we have tried to
highlight some of the important items, individuals should look
for and obey caution, Warning and Danger signs placed on
equipment, and displayed in the workplace. Operators should
read and follow safety instructions packed with each product.
Learn how each machine works. Even if you have previously
used similar machines, carefully check out each machine
before you use it .Get the -feel‖ of it and know its capabilities,
limitations, potential hazards, how it operates, and how it
stops.

APPLICATIONS

Trench compaction
Road maintenance
Brick paving

FUNCTIONS AND CONTROLS

The motor is controlled by an ON/OFF switch or push button
which is mounted on the motor below the fuel tank
Tension of the drive belt is adjustable. Loosen the four nuts on
the bolts which secure the motor to the base plate, Adjust the
set screws which bear against the motor crankcase to achieve
Thank you for
Earth works
Landscaping
Driveway toppings
.
the required belt tension .Ensure that the four nuts and the set
screw locknuts are tightened after adjustment.

ACCESSORIES

Transportation Trolley; Protective Frame; Rubber Mat etc.

HAZARDS AND RISKS

NEVER allow any person to operate the machine without
adequate instruction.
ENSURE all operators read, understand and follow the
operating instructions;
SERIOUS INJURY could result from improper or careless use
of this machine;
Plates compactors are heavy units and should be positioned
by two people of appropriate strength. Using
The lifting handles provided on the machine, along with correct
lifting techniques.
！MECHANICAL HAZARDS
D
O NOT operate the machine unles s all protective guards are
in place.
KEEP handles and feet clear of rotating and moving parts as
they will cause injury if contacted.
ENSURE that the motor operation switch is in the OFF position
and the spark plug ignition lead is disconnected before
removing the guards or making adjustments.
ENSURE both the machine and the operator are stable by
setting up on level terrain and the machine will not tip over,
slide of fall while in operation or unattended.
DO NOT leave the machine in operation while it is unattended.
ENSURE that the walls of a trench are stable and will not
collapse due to the action of the vibration, prior to commencing
compaction.
EUSURE that the area to be compacted does not contain any
-live‖ electrical cables, gas, water or communication services
which many be damaged by the action of vibration.
EXERCISE CARE when operating unit. Exposure to vibration
or repetitive work actions may be harmful to hands and arms.
NEVER stand on the unit while it is operating.
DO NOT increase the governed no-load motor speed above
3,500 r/min. Any increase may result in personal injury and
damage to the machine.
BE CAREFUL not to come in contact with the muffler when the
engine is hot, since it can cause severe burns.
ENSURE that the repairs to the motor and machine are carried
out by COMPETENT personnel.
！FIRE & EXPLOSION HAZARDS
PETROL is extremely flammable and explosive under certain
conditions;
ENSURE that the petrol is only stored in an approved storage
2