Raymarine Dragonfly-4 Installation And Operation Instructions Manual page 74

Accessing the context menu
You can access the context menu by following the
steps below.
1. Use the Directional controls to highlight the
waypoint.
The cursor changes to the WPT cursor.
2. Press the OK button.
The Waypoint context menu is displayed.
Waypoint placement
Placing a waypoint
Displays with a GPS / GNSS receiver can use
waypoints to mark points of interest.
1. Use the Directional controls to highlight the
desired location with the cursor.
2. Press the OK button.
The context menu is displayed.
3. Select Place Waypoint.
A confirmation pop up message is displayed.
4. Select Ok to place the waypoint, or Edit to edit
the waypoint details.
A waypoint is placed at the cursor's location.
Placing a waypoint at your vessel's position
From the Chart application:
1. If required press the Back button to enter motion
mode.
2. Press the OK button again to open the menu.
3. Select Place Waypoint.
A confirmation pop up message is displayed.
4. Select Ok to place the waypoint, or Edit to edit
the waypoint details.
Waypoint groups
Waypoints are organized into groups. By default all
waypoints are placed in the "UNSORTED" group.
New waypoint groups can be created and each
waypoint can be assigned to a waypoint group. For
example; you could create a waypoint group called
"Fishing" and place all of your waypoints where you
caught fish into that group.
Waypoint groups can be managed from the Waypoint
groups list.
1
3
4
1. All waypoints — Displays a list of all waypoints
saved on your system.
2. Today's Waypoints — Displays a list of all
waypoints created or modified today.
74
3. Unsorted — By default new waypoints are
added to the UNSORTED waypoint group.
Selecting the group will display a list of all
waypoints that have not been assigned to a
specific group.
4. Waypoint Groups — All waypoint groups are
displayed in the list.
5. Search — You can search for waypoints using
keywords by selecting Search.
6. New Group — A new waypoint group can be
added by selecting New Group.
7. Import/Export — Waypoints can be exported to
or imported from a microSD card by selecting
Import/Export. Refer to
user settings
Selecting a waypoints group from the list displays a
list of all waypoints in that group. Additional functions
are available to help manage your waypoints.
1
1. Sort By: — Sort waypoints by Name, Range,
Symbol or Date.
2. Search — Search for waypoints using keywords.
3. Export — Exports the waypoint group currently
displayed to a memory card.
4. Waypoint group — This is the currently selected
waypoint group.
5. Rename Group — Rename the current group.
6. Erase Wpts — Erase all waypoints in the group.
7. Move Wpts — Move all waypoints in the group.
8. Assign Symbol — Assign a new symbol to all
waypoints in the group.
Displaying the waypoints group list
2
From the Chart application:
1. If required, Press the Back button to enter motion
mode.
2. Press the Ok button to open the Chart application
menu.
3. Select Waypoints.
The waypoints group list is displayed.
D13015-1
Making a new waypoint group
With the Waypoint Group List displayed:
1. Select New Group.
The on-screen keyboard is displayed.
Saving user data and
for details.
2 3
Dragonfly-4 / Dragonfly-5 / WiFish
D13013-1