Wi-Fish Mobile App - Raymarine Dragonfly-4 Installation And Operation Instructions Manual

6.3 Wi-Fish TM mobile app
Raymarine's Wi-Fish TM
iOS 7 or greater and Android 4 or greater which must
be used to control the Wi-Fish
using a smart device such as a tablet or smartphone.
The Wi-Fish TM app can be downloaded from the
relevant app stores.
Connecting Wi-Fi — Wi-Fish
Mod el No E70290
Produ ct: Wi-Fish
Serial No. 1040009
SSID: 1234567890
Passphrase: ************
1. Install the Wi-Fish TM
store.
2. Connect your smart device's Wi-Fi to the
Wi-Fish TM unit.
The product's unique broadcasting ID known as
the SSID (Service Set Identifier) and Passphrase
for your product can be found on the product label
fixed to the bottom of the unit. It is recommended
that you take note of these and retain somewhere
safe for future reference.
3. Open the Wi-Fish TM
Connecting your smart device
Your smart device's Wi-Fi connection must be
connected to the product to enable use of the mobile
Wi-Fish TM app.
With the Wi-Fish TM mobile app installed on your
smart device:
1
Wi-Fish TM
mobile app is available on
TM Wi-Fi sonar module
TM
app from the relevant app
app.
2
1. Open the Wi-Fi settings on your smart device
and select your product's SSID from the list of
available devices.
Your product's SSID can be found on the product
label located on the bottom of the unit.
2. Enter your product passphrase.
Your product's passphrase can also be found on
the product label located on the bottom of the
unit.
3. Your device will now connect to the unit and
D13242-1
obtain an IP address.
4. Once your device is connected you can open the
Wi-Fish TM app.
D13198-1
D13243-1
43