Cabinet (Rear) Block - Sony DSC-F77 Service Manual

2-6. CABINET (REAR) BLOCK

Note: Be careful not to perform it
by force, or the cabinet (front)
may be distorted.
4 Pressing the rib (inner cabinet (rear)) in the
direction of arrow B, disengage the claw with
holding up the cabinet (rear) a little in the
direction of arrow C.
3 Move the lower part of the cabinet (front)
in the direction of arrow A.
Note: Do not move
that part too far.
[SERVICE POSITION : LCD]
Setting the "Forced Play ON mode"
1) Select page: 0, address: 01, and set
data: 01.
2) Select page: D, address: 21, set data:
08, and then press the PAUSE button
of adjustment remote commander.
LCD module
Cradle with LANC jack
(J-6082-548-A)
Claw
A
2 Screw (M1.7)
SY-81 board
2-5
Rib
(inner cabinet (rear))
B
1 Screw (M1.7)
C
Exiting the "Forced Power ON mode"
1) Select page: 0, address: 01, and set
data: 01.
2) Select page: D, address: 21, set data:
00, and then press the PAUSE button
of adjustment remote commander.
3) Select page: 0, address: 01, and set
data: 00.
to cradle
AC power
adaptor
Adjustment remote
commander
DSC-F77/FX77
DC-IN