Cabinet Rear Block - Sony Cybershot DSC-T90 Service Manual

HELP06:
Note on Assembling Front Block
In case of assembling front block, bend two claws on the cabinet rear block as shown below.
(Once front block is removed causes the engagement of two claws on the cabinet rear block and two bosses
on the control switch block (RL61230) becomes loose.)
Control Switch Block
(RL61230)
Front Block
DSC-T90_L2
Boss
Spot-welded point
Claw A
Bend Claw A to the spot-welded point
in the arrow direction.
Boss
Bend Claw B to the edge of Cabinet Rear
Block in the arrow direction.

Cabinet Rear Block

Claw A
Claw B
Edge of Cabinet Rear Block
Claw B
HELP