Challenge Xtreme CC200ESV User Manual

Challenge Xtreme CC200ESV User Manual

200w orbital sander

Advertisement

200W Orbital Sander
CC200ESV
ALWAYS READ THESE OPERATING INSTRUCTIONS PRIOR TO USE
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE
MADE IN CHINA
GENERAL SAFETY RULES
WARNING! Read all instructions Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury. The term "power tool" in
all of the warnings listed below refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS
The manufacturer shall not be liable for any changes made to the tool nor for
any damage resulting from such changes.
Even when the tool is used as prescribed it is not possible to eliminate all
residual risk factors. The following hazards may arise in connection with the
tools construction and design:
Damage to the lungs if an effective dust mask is not worn
Damage to hearing if effective ear defenders are not worn
Always remove the plug from the power point before making any
adjustments or maintenance, including changing the sandpaper.
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk of
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CC200ESV and is the answer not in the manual?

Questions and answers

Summary of Contents for Challenge Xtreme CC200ESV

  • Page 1 200W Orbital Sander The manufacturer shall not be liable for any changes made to the tool nor for CC200ESV any damage resulting from such changes. Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
  • Page 2: Additional Safety Rules For Sanders

    electric shock. parts, breakage of parts and any other condition that may affect the e) When operating a power tool outdoors, use an extension cord power tools operation. If damaged, have the power tool repaired suitable for outdoor use. Use of a cord suitable for outdoor use reduces before use.
  • Page 3: Technical Specifications

    • Use safety equipment including safety goggles or shield, ear protection, DETAIL SANDER COMPONENT LIST AND ACCESSORIES dust mask and protective clothing including safety gloves. • Be careful the harmful/toxic dusts arising from sanding (e.g. Lead paint, some woods and metal). •...
  • Page 4: Selecting The Right Grade Of Sandpaper

    OPERATING INSTRUCTIONS Different types of abrasive paper will allow the sander to meet various needs. Different grades of abrasive paper are available; the higher the This sander is a hand-held class II electric power tool. It is driven by single- grade number, the finer the grit.
  • Page 5: General Inspection

    will drop the speed of the sanding pad, overheat the motor, damage PLUG FITTING the parts of the sander and gouge the workpiece. This sander is supplied with a fitted plug; however if you should need to fit a • Always ensure that the sander is switched off &...
  • Page 6: Environmental Protection

    ENVIRONMENTAL PROTECTION Recycle unwanted materials instead of disposing of them as waste. All tools and packaging should be sorted, taken to the local recycling center and disposed of in an environmentally safe way. GUARANTEE This product is selected for DOMESTIC USE ONLY and not for business use . This product is guaranteed against manufacturing defects for a period of 12 months.

Table of Contents