Overview Of Operating Controls; Em 300 G2 Rack-Mount Receiver - Sennheiser EW 300 G2 Instructions For Use Manual

Overview of operating controls

EM 300 G2 rack-mount receiver

´ ² ¶ º
Operating controls
³
Graphic display, backlit
·
/ rocker button (DOWN/UP), backlit
» SET
button, backlit
¿ ON
button, backlit
(serves as the ESC (cancel) key in the
operating menu)
´
Cable grip for power supply DC cable
²
DC socket for connection of mains unit (DC IN)
¶
Audio output (AF OUT BAL),
XLR-3M socket, balanced
º
Audio output (AF OUT UNBAL),
¼" (6.3 mm) jack socket, unbalanced
¾
Service interface (DATA)
µ
Antenna input II (ANT II), BNC socket
¸
Type plate
¹
Antenna input I (ANT I), BNC socket
52
³ · » ¿
¾ µ ¸ ¹
Graphic display panel
Display for the current channel bank "1...8, U"
Display for the current channel number "1...8"
"B.CH" – abbreviation for channel Bank and
CHannel number
Alphanumeric display
"MHz" – appears when the frequency is displayed
Diversity display
(antenna I or antenna II active)
"PILOT" display
(pilot tone evaluation is activated)
Level display for received RF signal "RF"
Level display for received audio signal "AF",
with "PEAK" warning
4-step transmitter battery status display
Lock mode icon
(lock mode is activated)
Note:
For further illustrations and examples of the different
standard displays, please refer to the section
"Selecting the standard display" on page 78.