LG UB85 Series Owner's Manual page 22

A-22
MAKING CONNECTIONS
English
Transmits the video and audio signals from an external
device to the TV set. Connect the external device and
the TV set with the euro scart cable (or Scart gender
cable) as shown.
Output
Type
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
NOTE
Any Euro scart cable used must be signal
shielded.
When watching digital TV in 3D imaging mode,
only 2D out signals can be output through the
SCART cable. (Only 3D models)
Italiano
Consente la trasmissione dei segnali audio e video da
un dispositivo esterno al televisore. Collegare il disposi-
tivo esterno e il TV con un cavo Euro Scart (o un cavo
generico Euro Scart) come mostrato.
Tipo di uscita
Modalità
di ingresso
corrente
TV digitale
TV analogica, AV
Component
HDMI
1 Uscita TV : uscite segnali TV analogica o TV digitale.
NOTA
I cavi Euro Scart devono essere schermati.
Quando si guarda il TV digitale in modalità
immagini 3D, solo i segnali di uscita 2D possono
passare attraverso il cavo SCART. (Solo modelli
3D)
English
Connect various external devices to the TV and switch
input modes to select an external device. For more
information on external device's connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD play-
ers, VCRs, audio systems, USB storage devices, PC,
gaming devices, and other external devices.
AV1
(TV Out 1 )
Digital TV
Analogue TV
AV1
(Uscita TV 1 )
TV digitale
TV analogica
NOTE
The external device connection may differ from
the model.
Connect external devices to the TV regardless of
the order of the TV port.
If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
Refer to the external equipment's manual for
operating instructions.
If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture
is clear.
In PC mode, some resolution settings may not
work properly depending on the graphics card.
If Ultra HD content is played via PC, the video
or audio may have disruptions intermittently
depending on your PC's performance.