LG 65UB98 Series Owner's Manual

LG 65UB98 Series Owner's Manual

Hide thumbs Also See for 65UB98 Series:

Advertisement

Available languages

Available languages

Quick Links

Printing specification
1. Model Description
Model name
:
2nd, 3rd Suffix
:
2. Printing Specification
1. Trim size (Format)
:
2. Printing colors
• Cover
:
• Inside
:
3. Stock (Paper)
• Cover
:
• Inside
:
4. Bindery
:
5. Language
:
6. Number of pages
:
"This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
O
Especially, Part should be followed and controlled the following specification.
T
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
E
(2) Especially, Don't use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK
:
Printed in Kazakhstan
LGEAZ
:
Printed in Brazil
LGEEG
:
Printed in Egypt
Printed in India
LGEIL
:
Printed in Indonesia
LGEIN
:
Printed in Algeria
LGEAS
:
4. Changes
10
9
8
7
6
5
4
3
2
1
MAY/21/2014 Sinhye Hong
Rev. Number
MMM/DD/YYYY
Signature
Brand name
65UB980V-ZA
Product name
PI
148 mm x 210 mm (A5)
1 Color (Black)
1 Color (Black)
Uncoated, wood-free paper 150 g/㎡
Uncoated, wood-free paper 60 g/㎡
Perfect binding
ENG/ITA (2)
96
LGEKR
LGEMA
LGEMX
LGEND
LGERA
EKLE600521
ECO Number
Drawn
Sinhye Hong
Signature
APR/17/2014
MMM/DD/YYYY
:
LG
:
65UB980V-ZA
:
Printed in Korea
:
Printed in Poland
:
Printed in Mexico
Printed in China
:
Printed in Russia
:
Change the drawing of manual
- Add contents in HDMI connection
- Change drawing and specification about Stand Screw.
- Change the specification.
- Change the Remote Controler(L-con)
- Add the type of Ribbon Stand.
Change Contents
Checked
Approved
Mira Woo
Jongok Kim
APR/17/2014
APR/17/2014
Part number
:
MFL68066603
(Revision number)
(1406-REV01)
LGERS
:
Printed in Mexico
LGESY
:
Printed in China
LGETH
:
Printed in Thailand
Printed in Vietnam
LGEVN
:
Printed in Poland
LGEWR
:

Advertisement

Table of Contents
loading

Summary of Contents for LG 65UB98 Series

  • Page 1 5. Language ENG/ITA (2) 6. Number of pages “This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification.
  • Page 2 Part number MFL68066603 Pagination sheet Total pages 96 pages Front Cover … … … … P/No. A-19 A-20 Cover … … … … Blank Cover … … … … Back SPECIFIC ATIONS Cover Blank...
  • Page 3 OWNER’S MANUAL LED TV* LG LED TV applies LCD screen with LED backlights. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB95** UB98** www.lg.com *MFL68066603* P/NO : MFL68066603 (1406-REV01)
  • Page 4: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS A-3 SETTiNg up ThE TV A-3 Attaching the stand A-7 Tyding cables A-8 MAKiNg CONNECTiONS A-8 Antenna Connection A-9 Satellite dish Connection A-9 HDMI Connection A-10 - ARC (Audio Return Channel) A-11 DVI to HDMI Connection A-12 Component Connection A-13 Composite Connection A-14 MHL Connection...
  • Page 5: Setting Up The Tv

    SETTING UP THE TV SETTiNg up ThE TV Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB95**-ZA Stand Body (L) Stand Body (R) Stand Base Attach the stand to the TV using the upper mounting hole on the back of the TV. Attach the stand to the TV using the lower connection on the back of the TV.
  • Page 6 SETTING UP THE TV UB85**-ZD, UB95**-ZB Stand Body (R) Stand Body (L) Stand Base A type B type Attach the stand to the TV using the upper mounting hole on the back of the TV. Attach the stand to the TV using the lower connection on the back of the TV.
  • Page 7 SETTING UP THE TV UB98** (Only 65/79UB98**) Stand Base Wrench M6 x L47 (Only 65UB98**) M6 x L52 (Only 79UB98**) (Only 84UB98**) Wrench M6 x L52 (Insulation Holder)
  • Page 8 SETTING UP THE TV CAuTiON CAuTiON y Make sure that the screws are inserted correctly y When attaching the stand to the TV set, place and fastened securely. (If they are not fastened the screen facing down on a cushioned table or securely enough, the TV may tilt forward after flat surface to protect the screen from scratches.
  • Page 9 SETTING UP THE TV Tidying cables Gather and bind the cables with the Cable Holder Image shown may differ from your TV. (Only UB98**) Gather and bind the cables with the Cable Holder and the Cable Management. Fix the Cable Management firmly to the TV. (Only UB85**-ZA, UB95**-ZA) Cable Holder Cable Holder...
  • Page 10: Making Connections

    MAKING CONNECTIONS MAKiNg CONNECTiONS English Connect the TV to a wall antenna socket with an RF cable (75 Ω). This section on MAKiNg CONNECTiONS mainly uses diagrams for the UB85** models. NOTE y Use a signal splitter to use more than 2 TVs. Antenna Connection y If the image quality is poor, install a signal amplifier properly to improve the image quality.
  • Page 11: Satellite Dish Connection

    MAKING CONNECTIONS Satellite dish Connection hDMi Connection (Only satellite models) 13 / 18 V 700mA Max LNB IN DVD / Blu-Ray / HD Cable Box Satellite / HD STB / PC (*Not Provided) Satellite Dish English Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω).
  • Page 12: Arc (Audio Return Channel)

    A-10 MAKING CONNECTIONS 1) HDMI specifications may be different for each input port, so make sure to check the device specifications 1) Le specifiche HDMI potrebbero differire per ogni before connecting. porta d'ingresso; pertanto, controllare le specifiche del dispositivo prima del collegamento. 2) Contact customer service for more information on the HDMI specifications of each input port.
  • Page 13: Dvi To Hdmi Connection

    A-11 MAKING CONNECTIONS DVi to hDMi Connection English Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. Choose any HDMI input port to connect.
  • Page 14: Component Connection

    A-12 MAKING CONNECTIONS Component Connection English Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable(or component gender cable) as shown. NOTE y If cables are not installed correctly, it could cause this image to display in black and white or with COMPONENT distorted colours.
  • Page 15: Composite Connection

    A-13 MAKING CONNECTIONS Composite Connection English Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable(or composite gender cable) as shown. italiano Il segnale audio e video analogico viene trasmesso da COMPONENT un dispositivo esterno al televisore.
  • Page 16: Mhl Connection

    A-14 MAKING CONNECTIONS MhL Connection English Mobile High-definition Link (MHL) is an interface for transmitting digital audiovisual signals from mobile phones to television sets. NOTE y Connect the mobile phone to the hDMi(4K@60hz)/DVi iN 4(MhL) port to view the phone screen on the TV. y The MHL passive cable is needed to connect the TV and a mobile phone.
  • Page 17: Audio Connection

    A-15 MAKING CONNECTIONS Audio Connection English You may use an external audio system instead of the built-in speaker. Digital optical audio Connection Transmits a digital audio signal from the TV to an exter- nal device. Connect the external device and the TV with the optical audio cable as shown.
  • Page 18: Headphone Connection

    A-16 MAKING CONNECTIONS headphone Connection English Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. NOTE y AuDiO menu items are disabled when connecting a headphone. y OPTICAL DIGITAL AUDIO OUT is not available when connecting a headphone.
  • Page 19: Usb Connection

    A-17 MAKING CONNECTIONS uSB Connection English Connect a USB storage device such as a USB flash memory, external hard drive or a USB memory card reader to the TV and access the SmartShare menu to use various multimedia files. NOTE y Some USB Hubs may not work.
  • Page 20: Ci Module Connection

    A-18 MAKING CONNECTIONS Ci module Connection English View the encrypted (pay) services in digital TV mode. This feature is not available in all countries. NOTE y Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
  • Page 21: Euro Scart Connection

    A-19 MAKING CONNECTIONS Euro Scart Connection English Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown. Output Type (TV Out...
  • Page 22 A-20 MAKING CONNECTIONS English italiano Connect various external devices to the TV and switch Collegare diversi dispositivi esterni al televisore e input modes to select an external device. For more modificare la modalità di ingresso per selezionare information on external device’s connection, refer to the un dispositivo esterno.
  • Page 23 OWNER’S MANUAL LED TV* LG LED TV applies LCD screen with LED backlights. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. www.lg.com...
  • Page 24 TABLE OF CONTENTS TABLE of coNTENTS LIcENSES MAGIc REMoTE fUNcTIoNS Registering Magic Remote oPEN SoURcE SofTWARE How to use Magic Remote NoTIcE Precautions to Take when Using the Magic Remote ExTERNAL coNTRoL dEvIcE USING THE USER GUIdE SETUP MAINTENANcE SAfETy INSTRUcTIoNS Cleaning your TV - Viewing 3D Imaging - Screen, frame, cabinet and stand...
  • Page 25: Licenses

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
  • Page 26: Safety Instructions

    SAFETY INSTRUCTIONS SAfETy INSTRUcTIoNS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as a bathroom - Near any heat source such as stoves and other devices that produce heat - Near kitchen counters or humidifiers where they can easily be exposed to steam or - An area exposed to rain or wind...
  • Page 27 SAFETY INSTRUCTIONS y Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock. y When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard.
  • Page 28 SAFETY INSTRUCTIONS y Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. y Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
  • Page 29 SAFETY INSTRUCTIONS cAUTIoN y Install the product where no radio wave occurs. y There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. y Do not install the product on places such as unstable shelves or inclined surfaces.
  • Page 30 SAFETY INSTRUCTIONS y Make sure there are no objects between the remote control and its sensor. y Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. y When connecting external devices such as video game consoles, make sure the connecting cables are long enough.
  • Page 31 SAFETY INSTRUCTIONS y Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. y When cleaning the product and its components, unplug the power first and wipe it with a soft cloth.
  • Page 32 SAFETY INSTRUCTIONS y You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. y Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.
  • Page 33: Viewing 3D Imaging (Only 3D Models)

    SAFETY INSTRUCTIONS viewing 3d Imaging (only 3d models) WARNING viewing Environment y Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness y Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents.
  • Page 34 3d glasses y Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. y Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
  • Page 35: Installation Procedure

    INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NoTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future.
  • Page 36 ASSEMBLING AND PREPARING NoTE How to use the ferrite core (depending on model) y Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. [Cross Section of Ferrite Core] (Dep [to the TV]...
  • Page 37 ASSEMBLING AND PREPARING ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU Tag On ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote control, Magic remote, batter- owner’s manual Tag on Batteries (AAA) ies (AA) (Depending on model) (Depending on model) (Only UB85**, UB95**, The remote control will...
  • Page 38 ASSEMBLING AND PREPARING Stand Screws Stand Screws Stand Screws ferrite core 4EA, M4 x L10 4EA, M6 x L47 4EA, M6 x L52 (Depending on model) (Only UB85**-ZD, (Only 65UB98**) (Only 79/84UB98**) UB95**-ZB) (See p. A-5) (See p. A-5) (See p. A-4) cable Managements cable Managements Wrench...
  • Page 39: Separate Purchase

    Contact your dealer for buying these items. These devices only work with certain models. AG-f***dP AG-f*** AN-MR500 AN-vc5** Dual play glasses Cinema 3D glasses Magic Remote Video call camera LG Audio device Tag on compatibility UB85** UB95** UB98** AG-f***dP • • •...
  • Page 40: Parts And Buttons

    Intelligent sensors Joystick Button Power Indicator Power Indicator D type : UB95**-ZB C type : UB95**-ZA Screen Screen Speakers Speakers Remote control and Remote control and Intelligent sensors Joystick Button Intelligent sensors Joystick Button LG Logo light LG Logo light...
  • Page 41 Joystick Button - This button is located behind the TV screen. Joystick Button - This button is located below the TV screen. NoTE y You can set the LG Logo Light or power indicator light to on or off by selecting General in the main menus. (Depending on model)
  • Page 42: Using The Joystick Button

    ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic functions When the TV is turned off, place your finger on the joystick button and Power on press it once and release it.
  • Page 43: Lifting And Moving The Tv

    ASSEMBLING AND PREPARING Lifting and moving the Tv y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as Please note the following advice to prevent the TV from shown in the following illustration.
  • Page 44 ASSEMBLING AND PREPARING Securing the Tv to a wall Using the Kensington security system (This feature is not available for all models.) (This feature is not available for all models.) y Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV.
  • Page 45: Mounting On A Wall

    We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is ad- equately secured to the wall with enough space to allow connectivity to external devices.
  • Page 46: Using Built-In Camera

    TV. This TV does not support the use of an external may fall and result in severe injury. camera. Use an authorized LG wall mount and contact the local dealer or qualified personnel. NoTE y Do not over tighten the screws as this may cause damage to the TV and void your warranty.
  • Page 47: Preparing Built-In Camera

    ASSEMBLING AND PREPARING Preparing Built-in camera Push down the built-in camera when you are not using it. Pull up the slide at the back of the TV. Angle Adjustment Lever Slide Name of Parts of Built-in camera Protective Film Microphone NoTE Camera Lens y Remove the protective film before using the built-...
  • Page 48: Remote Control

    REMOTE CONTROL REMoTE coNTRoL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover.
  • Page 49 REMOTE CONTROL (Depending on model) AD/PIP (PoWER) Turns the TV on or off. Tv/RAd Selects Radio, TV and DTV programme. INPUT Changes the input source. TV / SETTINGS Accesses the main menus. INPUT Q. MENU Accesses the quick menus. SETTINGS INFO SUBTITLE INFO...
  • Page 50: Magic Remote Functions

    MAGIC REMOTE FUNCTIONS MAGIc REMoTE fUNcTIoNS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV.
  • Page 51: Registering Magic Remote

    MAGIC REMOTE FUNCTIONS How to use Magic Remote voice recognition Network connection is required to use the voice recognition function. y Shake the Magic Remote slightly 1 . Press the Voice recognition button. to the right and left or press 2 .
  • Page 52: Precautions To Take When Using The Magic

    MAGIC REMOTE FUNCTIONS Precautions to Take when Using the Magic Remote y Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. y A communication failure may occur due to nearby devices.
  • Page 53: Using The User Guide

    USING THE USER GUIDE / MAINTENANCE MAINTENANcE USING THE USER GUIdE User Guide allows you to more easily access the detailed TV information. cleaning your Tv Clean your TV regularly to keep the best performance Press the (Home) button to access the Home menu.
  • Page 54: Troubleshooting

    TROUBLESHOOTING / SPECIFICATIONS TRoUBLESHooTING Problem Solution Cannot control the TV with y Check the remote control sensor on the product and try again. the remote control. y Check if there is any obstacle between the product and the remote control. y Check if the batteries are still working and properly installed No image display and no y Check if the product is turned on.
  • Page 55 SPECIFICATIONS (Only UB98**) Wireless LAN module (LGSWF41) specification Standard IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 14.5 dBm 802.11b: 16 dBm Output Power 802.11g: 13.5 dBm (Max.) 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.11ac - 5GHz : 16 dBm...
  • Page 57 MANUALE UTENTE TV LED* TV LED LG include uno schermo LCD con retroilluminazione LED. Fai clic! Manuale dell'utente Leggere attentamente il presente manuale prima di utiliz- zare l'apparecchio e conservarlo come riferimento futuro. www.lg.com...
  • Page 58 (a titolo meramente esemplificativo: congiuntivite, infestazioni del capo ecc…) fino alla completa scomparsa dell’infezione stessa. Le presenti indicazioni sono da intendersi quale aggiornamento dei manuali d’uso dei prodotti “LG” a tecnologia 3D fruibile tramite occhiali, come applicabile, e ne costituiscono parte integrante e...
  • Page 59 INDICE INDICE LICENzE FUNzIONI DEL TELCOMANDO MAGIC REMOTE AVVISO PER IL SOFTWARE OPEN Registrazione del telecomando Magic Remote SOURCE Come utilizzare il telecomando Magic Remote Precauzioni nell'uso del telecomando Magic Remote IMPOSTAzIONE DI UN DISPOSITIVO DI CONTROLLO UTILIzzO DEL MANUALE UTENTE ESTERNO MANUTENzIONE ISTRUzIONI DI SICUREzzA...
  • Page 60 LG Electronics fornisce anche il codice Open Source su CD-ROM a fronte del pagamento di una cifra a copertura dei costi che tale distribuzione comporta (come il costo del supporto, di spedizione e gestione) in seguito a richiesta inviata via e-mail a: opensource@lge.com.
  • Page 61 ISTRUZIONI DI SICUREZZA ISTRUzIONI DI SICUREzzA Leggere attentamente queste istruzioni di sicurezza prima di utilizzare il prodotto. AVVISO y Non collocare il televisore e il telecomando nei seguenti ambienti: - In un luogo esposto alla luce diretta del sole - In un luogo dove è presente un elevato livello di umidità, ad esempio in bagno - Vicino a fonti di calore, ad esempio stufe o altri dispositivi che producono calore - Vicino a piani cottura o umidificatori, dove è...
  • Page 62 ISTRUZIONI DI SICUREZZA y Piegare il cavo dell’antenna tra l’interno e l’esterno dell’edificio per impedire l’ingresso di gocce di pioggia. L’acqua può danneggiare il prodotto e provocare scosse elettriche. y Quando si monta il televisore sulla parete, assicurarsi di non far passare il cavo di alimentazione e quello dell’antenna dietro al televisore.
  • Page 63 ISTRUZIONI DI SICUREZZA y Non spruzzare acqua sul prodotto né pulirlo con prodotti infiammabili (solventi o benzene). Possono verificarsi incendi o scosse elettriche. y Evitare impatti d’urto sul prodotto o di far cadere oggetti all’interno del prodotto e sullo schermo. Vi è...
  • Page 64 ISTRUZIONI DI SICUREZZA ATTENzIONE y Installare il prodotto in un luogo privo di onde radio. y Tra un’antenna esterna e le linee elettriche deve esserci una distanza sufficiente a impedire che la prima tocchi le seconde anche in caso di caduta dell’antenna per evitare il rischio di scosse elettriche.
  • Page 65 ISTRUZIONI DI SICUREZZA y Verificare che non vi siano oggetti tra il telecomando e il sensore. y La luce del sole e altre fonti luminose intense possono interferire con il segnale del telecomando. Se ciò si verifica, oscurare la stanza. y Quando si collegano dispositivi esterni come console per videogiochi, verificare che i cavi di collegamento siano sufficientemente lunghi.
  • Page 66 ISTRUZIONI DI SICUREZZA y Evitare di toccare lo schermo o di premere su di esso con le dita troppo a lungo. Questa operazione potrebbe provocare alcuni effetti temporanei di distorsione sullo schermo. y Quando si pulisce il prodotto e i suoi componenti, scollegare prima il cavo di alimentazione e utilizzare un panno morbido.
  • Page 67 ISTRUZIONI DI SICUREZZA y La luminosità e il colore del pannello possono differire a seconda della posizione di visione (sinistra/destra/alto/basso). Il fenomeno è dovuto alle caratteristiche del pannello. Non ha nulla a che vedere con le prestazioni del prodotto e non indica malfunzionamento. y Quando un’immagine fissa (ad esempio la trasmissione del logo di un canale, di un menu a schermo o della scena di un videogioco) è...
  • Page 68 ISTRUZIONI DI SICUREZZA Visione di immagini 3D (solo modelli 3D) AVVISO Ambiente di visione y Tempo di visione - Quando si guardano contenuti 3D, fare una pausa di 5-15 minuti ogni ora. La visione prolungata di contenuti 3D può causare mal di testa, vertigini, senso di stanchezza o affaticamento degli occhi. Persone con crisi convulsive da fotosensibilizzazione o malattia cronica y Alcuni utenti possono essere soggetti a crisi o altri sintomi anomali quando sono esposti a luci lampeggianti o motivi particolari presenti nei contenuti 3D.
  • Page 69 Precauzioni nell'uso degli occhiali 3D y Usare solo occhiali 3D LG. In caso contrario, potrebbe non essere possibile vedere i video 3D correttamente. y Non usare occhiali 3D in sostituzione di occhiali comuni, da sole o protettivi.
  • Page 70 PROCEDURA DI INSTALLAZIONE / MONTAGGIO E PREPARAZIONE NOTA y Il televisore raffigurato nell'immagine può essere diverso da quello in uso. y Il menu OSD (On Screen Display) del TV potrebbe risultare leggermente diverso da quello mostrato in questo manuale. y I menu e le opzioni disponibili possono essere diversi a seconda della sorgente in ingresso o del modello del prodotto utilizzati.
  • Page 71 MONTAGGIO E PREPARAZIONE NOTA Come utilizzare il nucleo di ferrite (in base al modello) y Utilizzare il nucleo di ferrite per ridurre le interferenze elettromagnetiche nel cavo LAN. Inserire il cavo LAN una volta nel nucleo di ferrite. Posizionare il nucleo di ferrite accanto al televisore. [trasversale del nucleo di ferrite] [al televisore] [al dispositivo esterno]...
  • Page 72 MONTAGGIO E PREPARAZIONE ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU Tag On ENTER BACK EXIT L/R SELECT FREEZE RATIO Telecomando e Telecomando magic Manuale utente Tag on batterie (AAA) remote, batterie (AA) (in base al modello) (in base al modello) (Solo UB85**, UB95**, Il telecomando non è...
  • Page 73 MONTAGGIO E PREPARAZIONE Viti del supporto Viti del supporto Viti del supporto Nucleo di ferrite 4EA, M4 x L10 4EA, M6 x L47 4EA, M6 x L52 (in base al modello) (Solo UB85**-ZD, (Solo 65UB98**) (Solo 79/84UB98**) UB95**-ZB) (Vedere pag. A-5) (Vedere pag.
  • Page 74 • • Telcomando Magic Remote AN-VC5** Telecamera per • • videochiamate Dispositivo audio LG • • • Tag on • • • Il nome del modello o il design può cambiare in base all’aggiornamento delle funzioni del prodotto, al produt-...
  • Page 75 Indicatore di alimentazione alimentazione Tipo C : UB95**-ZA Tipo D : UB95**-ZB Schermo Schermo Altoparlanti Altoparlanti Telecomando e Telecomando e sensori intelligenti sensori intelligenti Pulsante joystick Pulsante joystick LG Logó Fény LG Logó Fény (a TV elején) (a TV elején)
  • Page 76 Pulsante joystick - Questo pulsante si trova o dietro lo schermo del TV. Pulsante joystick - Questo pulsante si trova sotto lo schermo del TV. NOTA y È possibile impostare la spia del logo LG o la spia dell'indicatore di alimentazione selezionando Generale nei menu principali. (in base al modello)
  • Page 77 MONTAGGIO E PREPARAZIONE Uso del pulsante joystick È possibile attivare le funzioni del TV, premendo o spostando il pulsante joystick verso l’alto, verso il basso, a destra o sinistra. Funzioni di base Quando il TV è spento, posizionare il dito sul pulsante joystick, pre- Accensione mere una volta, quindi rilasciare il pulsante.
  • Page 78 MONTAGGIO E PREPARAZIONE Sollevamento e spostamento del TV y Per trasportare un televisore di grandi dimensioni occorrono 2 o 3 persone. y Durante il trasporto, tenere il televisore come Prima di sollevare o spostare il televisore, leggere le mostrato nell’illustrazione di seguito. seguenti indicazioni per evitare di graffiare o danneg- giare l’apparecchio e per un trasporto sicuro a prescin- dere dal tipo e dalle dimensioni.
  • Page 79 MONTAGGIO E PREPARAZIONE Fissaggio della TV alla parete Utilizzo del sistema di sicurezza Kensington (funzione non disponibile su tutti i modelli.) (Funzione non disponibile su tutti i modelli.) y L'immagine mostrata qui può essere diversa dal televisore in uso. Il connettore del sistema di sicurezza Kensington è situato sul retro del televisore.
  • Page 80 Si consiglia di utilizzare la staffa per il montaggio a parete di LG. Se la staffa per montaggio a parete di LG non viene utilizzata, servirsi di una staffa per montaggio a parete che consenta una corretta installazione del dispositivo alla parete, lasciando lo spazio adeguato per il collegamento a dispositivi esterni.
  • Page 81 Utilizzare un supporto per montaggio a parete Questo TV non supporta l’uso di una telecamera autorizzato da LG e contattare il rivenditore esterna. locale o il personale qualificato. Eventuali supporti per montaggio a parete di terzi NOTA non sono coperti dalla garanzia.
  • Page 82 MONTAGGIO E PREPARAZIONE Preparazione della videocamera inte- Abbassare la videocamera integrata quando non viene utilizzata. grata Abbassare la videocamera integrata quando non viene utilizzata. Leva di regolazione dell’angolazione Guida Nome delle parti della videocamera integrata Pellicola protettiva Obiettivo della Microfono videocamera NOTA y Rimuovere la pellicola di protezione prima di...
  • Page 83 TELECOMANDO TELECOMANDO Le descrizioni nel presente manuale si basano sui pulsanti del telecomando. Leggere attentamente il presente manuale e utilizzare correttamente il televisore. Per sostituire le batterie, aprire il coperchio del vano batterie, inserire le bat- terie (AAA da 1,5 V) rispettando le polarità come indicato dall’etichetta all’interno del vano e chiudere il coperchio.
  • Page 84 TELECOMANDO (in base al modello) AD/PIP (ACCENSIONE) Consente di accendere o spegnere la TV. TV/RAD Consente di selezionare il programma Radio, TV o DTV. INPUT Consente di modificare la sorgente in ingresso. SETTINGS Consente di accedere ai menu principali. Q. MENU Consente di accedere ai menu rapidi. TV / INFO Consente di visualizzare le informazioni del programma e della schermata...
  • Page 85 FUNZIONI DEL TELCOMANDO MAGIC REMOTE FUNzIONI DEL TELCOMANDO MAGIC REMOTE Quando viene visualizzato il messaggio "Batteria telcomando Magic Remote quasi scarica. Sostituire batteria.", sostituire la batteria. Per sostituire le batterie, aprire il coperchio del vano batterie, sostituire le batterie (AA da 1,5 V) facendo corrispondere le estremità...
  • Page 86 FUNZIONI DEL TELCOMANDO MAGIC REMOTE Come utilizzare il telecomando Riconoscimento vocale Magic Remote Per utilizzare la funzione di riconoscimento vocale è necessaria una connessione di rete. 1 . Premere il pulsante per il riconoscimento vocale. 2 . Pronunciare il contenuto che si desidera quando y Scuotere leggermente il viene visualizzata la finestra relativa alla voce Telecomando magico a destra e...
  • Page 87 FUNZIONI DEL TELCOMANDO MAGIC REMOTE Precauzioni nell'uso del teleco- mando Magic Remote y Utilizzare il telecomando entro la distanza massima di comunicazione (10 m). L'utilizzo del telecomando oltre questa distanza o con l'ostruzione di un og- getto potrebbe provocare un errore di comunicazi- one.
  • Page 88 UTILIZZO DEL MANUALE UTENTE / MANUTENZIONE MANUTENzIONE UTILIzzO DEL MANUALE UTENTE Pulizia del televisore La guida utente consente di accedere più facilmente a informazioni dettagliate sul televisore. Pulire regolarmente il televisore per mantenerne le prestazioni ottimali e per estenderne la durata nel Premere il pulsante (Casa) per accedere al menu tempo.
  • Page 89 RISOLUZIONE DEI PROBLEMI / SPECIFICHE TECNICHE RISOLUzIONE DEI PROBLEMI Problema Soluzione Impossibile controllare la y Controllare il sensore del telecomando sul prodotto e riprovare. TV con il telecomando. y Verificare la presenza di eventuali ostacoli tra il televisore e il telecomando. y Controllare che le batterie siano ancora cariche e correttamente inserite ( Non viene visualizzata y Controllare che la TV sia accesa.
  • Page 90 SPECIFICHE TECNICHE (Solo UB98**) Specifiche tecniche del modulo Wireless LAN (LGSWF41) Standard IEEE 802.11a/b/g/n/ac Da 2400 a 2483,5 MHz Gamma di frequenza Da 5150 a 5250 MHz Da 5725 a 5850 MHz (Fuori dall’UE) 802.11a: 14.5 dBm 802.11b: 16 dBm Potenza in uscita 802.11g: 13.5 dBm (Max.)
  • Page 91 SPECIFICHE TECNICHE Le specifiche del prodotto precedentemente indicate possono subire modifiche senza preavviso in seguito all’aggiornamento delle funzioni del prodotto. Per l’alimentazione e il consumo di energia, consultare l’etichetta sul prodotto. 49UB85** MODELLI 49UB850V-ZA 49UB850V-ZD 1093 x 689 x 242 1093 x 681 x 237 Con supporto (mm) Dimensioni...
  • Page 92 SPECIFICHE TECNICHE 65UB98** 79UB98** MODELLI 65UB980V-ZA 79UB980V-ZA Con supporto (mm) 1560 x 884 x 264 1874 x 1075 x 330,6 Dimensioni (L x A x P) Senza supporto (mm) 1560 x 849 x 75 1874 x 1030 x 86,8 Con supporto (kg) 39,9 60,6 Peso...
  • Page 93 SPECIFICHE TECNICHE Dichiarazione di conformità La società LG Electronics Italia S.p.A. dichiara che il televisore a colori LG 55UB850V-ZD / 55UB850V-ZA / 49UB850V-ZD / 49UB850V-ZA / 65UB950V-ZB / 65UB950V-ZA / 55UB950V-ZB / 55UB950V-ZA / 84UB980V-ZA / 79UB980V-ZA / 65UB980V-ZA è fabbricato in conformità alle prescrizioni del D.M. n°548 del 28/08/95, pubblicato sulla G.U.
  • Page 94 DIAGRAMMI A BLOCCHI DIAGRAMMI A BLOCCHI (Solo UB85**, UB95**, UB98**)
  • Page 95: Specifications

    SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. 49UB85** MODELS 49UB850V-ZA 49UB850V-ZD With stand (mm) 1093 x 689 x 242 1093 x 681 x 237 Dimensions (W x H x D) Without stand (mm) 1093 x 646 x 38.2 1093 x 646 x 38.2 With stand (kg)
  • Page 96 SPECIFICATIONS 65UB98** 79UB98** MODELS 65UB980V-ZA 79UB980V-ZA With stand (mm) 1560 x 884 x 264 1874 x 1075 x 330.6 Dimensions (W x H x D) Without stand (mm) 1560 x 849 x 75 1874 x 1030 x 86.8 With stand (kg) 39.9 60.6 Weight...
  • Page 98 Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service Service 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200255...

Table of Contents