Setting The Angle - Invacare Storm 4 User Manual

Invacare® Storm®⁴
1. Press the unlocking button (1) and swivel the footrest/legrest
outward.
2. Remove the footrest/legrest in an upward direction.

7.3.2 Setting the angle

CAUTION!
Risk of injury due to incorrect adjustment of the
footrests and legrests
– Before and during every journey it is imperative to
ensure that the legrests contact neither the caster
wheels nor the ground
Requirements:
•
1 x 6 mm Allen key
60
1.
Loosen the screw (1) using the Allen key.
2. If the footrest cannot be moved after loosening the screw,
position a metal pin in the designated borehole (2) and use a
hammer to knock on this lightly. The clamping mechanism in
the interior of the footrest will be released by this. Repeat the
procedure from the other side of the footrest if necessary.
3.
Loosen the screw (1) using the Allen key.
4. Set the desired angle.
5. Re-tighten the screw.
1529686-P