Set Up Wireless Network - Pandigital PAN8000DWPCF1 User Manual

To select the desired characters:
Touch the keys multiple times as needed.
Use the
multiple times as needed.
= Access the following symbols:
SYM
\ / : ; ( ) $ & [ ] . , % ^ + = - | < > { } ! ~
= Toggles between numeric and letter characters
NUM
= Toggles between upper and lower case letters
ABC/abc
= Scroll through your entry to edit as needed
= Erases last selected character
Backspace
= Completes entry
Done
= Return to the previous screen without an entry
Cancel
You can also use the remote control buttons as follows:
Note:
' ' = Scroll forward through entry to edit as needed
+
' ' = Scroll back through entry to edit as needed
-
= Backspace, erases last selected character
ROTATE
= Toggles between SYM / NUM / ABC / abc screens
ZOOM

Set up Wireless Network

Note: You must have an active wireless network within range of the DPF, and the Pandigital wireless Wi-Fi USB Adapter must be connected to the DPF.
(Wi-Fi adapter sold separately on our website: http://www.pandigital.net.)
1. Insert the Pandigital wireless USB adapter into the USB Host port on the DPF.
HOME
2. On the
3. Select
Wi-Fi Network Setup
4. Select Scan for Available Network. The wireless networks within range will be listed.
TIP: If your wirless network is configured to be 'hidden', the scan will not list it as an available network. In this case, select one of the Network SSID
buttons to manually enter the Network ID.
5. Touch the down arrow to scroll through the list, and then touch
Use
6. The virtual keyboard will be displayed; enter your wireless network password, and then select
'ABC/abc' 'NUM' and 'SYM' keys as needed for correct characters.)
Network Setup
The
7. If necessary, change the
8. Select
Connect
18
buttons to highlight the keys, and then press
screen, touch or press to display the
MENU
Network Setup
. The
to scroll through the list, and then press
screen will be displayed, similar to this example:
Secure Access
type by selecting the
. Do not touch the screen or press any other keys until the connection completes (20-30 seconds).
,
ENTER
Setup Menu
screen.
window will be displayed, similar to this example:
to select the desired network.
Done
to select the desired network.
ENTER
button multiple times.
Secure Access
. (The password is case sensitive; use the
Done