TATA Motors Bolt Owner's Manual page 85

GEAR LEVER & SHIFTING (AMT)
Manual Mode:
Driver should select the desired gear
by shifting lever to,
+ : Upshift the gears.
- : Downshift the gears.
Push the gearshift lever to the '+'
direction and release it. Every time the
lever is operated, upshifting takes place
1 step in the order of 1st
3rd 4th 5th gear.
Pull the gearshift lever to the '–'
direction and release it. Every time the
lever is operated, downshifting takes
place in the order 5th
2nd 1st gear.
In manual mode, gears are not shifted
automatically unless the engine RPM
threshold is reached.
Drive Mode:
Two drive modes 'ECO' and 'SPORT'
are provided. These modes can be
used to adjust engine characteristics
and vehicle performance inline with
desired requirement.
To activate, Press 'S' button situated
on the gear lever grille.
2nd
4th 3rd
'SPORT' mode activation will be
displayed on instrument cluster other-
wise 'ECO' mode will be displayed.
It can be activated only in automatic
mode.
To deactivate press the 'S' button
again.
Stopping:
The vehicle can be stopped by depress-
ing the brake pedal regardless of the
gear position. This is because the
clutch is automatically disengaged to
prevent the engine from stopping.
If the gearshift lever is in the 'A'
position, the gear will be downshifted
to 1st when the vehicle stops.
If the gearshift lever is in the 'M'
position, the gear will be downshifted
to 1st when the vehicle stops.
STARTING & DRIVING
85
06