TATA Motors Bolt Owner's Manual page 129

REMOTE BATTERY
REMOTE BATTERY :
Battery changing procedure for
Remote Key :
Remote control key contains a battery
which is housed under the cover.
If red LED remote flashes for 5 times
after placing and releasing any button
on remote. It is recomended to replace
battery at a TATA MOTORS author-
ized service center.
You should, however, proceed as fol-
lows if you wish to replace the dis-
charged battery yourself:
1. Open the key.
2. Press off the battery cover with your
thumb or using a flat screw driver
at the points of the arrows 1.
3. Remove the discharged battery
from the key by pressing the
battery downwards at the point of
the arrow.
4. Insert the new battery.
5. Ensure that the "+" symbol on the
battery is facing upwards.
MAINTENANCE & SERVICING
6. The correct polarity is shown on the
battery cover.
Position the battery cover on the
key and press on it until it is heard
to lock in place.
NOTE
Use CR 2032 battery only.
08
129