Customer Warranty - Cobra CPI1090 Operating Instructions Manual

1000 watt power inverter
Table of Contents

Advertisement

Important Safety Information
lation
Notes
Introduction
Intro
Operation
WARNING Power inverters contain components
that tend to produce arcs or sparks. To prevent
fire or explosion, do not install the inverter in
otice
Caution
Warning
areas or compartments containing batteries or
flammable materials or in locations that require
Installation
ignition-protected equipment.
Secondary Icons
WARNING To reduce the risk of fire, do not cover
or obstruct the ventilation openings. Do not install
inverter in zero-clearance compartment.
Proposition 65: Warning: Wash Hands After
Handling Power Cord
The power cord on this product contains lead, a chemical
known in the state of California to cause birth defects or
other reproductive harm.
Caution: Rechargeable Appliances
Certain chargers for small nickel cadmium batteries
can be damaged if connected to the Cobra 1000 watt
inverter. Two particular types of equipment are
prone to this problem:
Plug In Directly
Dangerous
Voltages
This problem does not occur with the vast majority of
battery operated equipment. Most use a separate charger
or transformer that is plugged into the AC receptacle
and produces a low voltage output. If the label on the AC
adapter or charger states that it produces a low voltage
AC or DC output (less than 30 volts), the inverter will
have no problem powering the adapter safely.
2
Customer
Warranty
Assistance
Notes
Notice
Caution
Warning
1. Small battery-operated appliances
such as flashlights, razors, and
night lights that can be plugged
directly into an AC receptacle to
recharge.
2. Certain battery chargers for
battery packs used in hand
power tools. These chargers have
a WARNING label stating that
dangerous voltages are present
at the battery terminals.
Important Safety Information
Introduction
Intro
Operation
Cobra 1000 Watt Output Waveform
Some very sensitive electronic equipment may not operate
satisfactory on "square wave" or "modified sine wave."
The output waveform is referred to as "square wave" or
"modified sine wave." It is a stepped waveform designed
Installation
to have characteristics similar to the sine wave shape of
Secondary Icons
utility power.
A waveform of this nature is suitable for most AC loads
(including linear and switching power suppliers used in
electronic equipment, transformers and motors).
Notice
Nothing Comes Close to a Cobra
Customer
Warranty
Assistance
Notes
Caution
Warning
3

Advertisement

Table of Contents
loading

Table of Contents