Canon PIXMA MP980 series Quick Start Manual page 24

s..No"""____
o-r..cr
OSI"-INi_hlft'llOln,, _ _ ...
~_~cl ~L"":.
1V-s-.RMbj
Next, read "13 Information" on page 31!
• To change the port name, click View Setup Results, then click Set Port
Name. For details, refer to "8 Changing the port name" in the printed
manual: Network Setup Troubleshooting .
• If Unsafe Removal of Device is displayed, click OK.
~
USB
When the Setup Completion dialog box appears, remove the USB
cable, then click Finish.
McI . . OIOlI*II ltllloo _ _
~ l\b."'"4
• If the error message appears, refer to "5 The following screen is displayed
during setup" in the printed manual: Network Setup Troubleshooting.
When the Network Setup of the Card Slot dialog box appears, specify
the drive letter, then click Next.
8
Windows XP/2000