Calibrate Touch Screen; Frequently Asked Questions - Pandigital PAN8000DWPCF1 User Manual

C a l i b r a t e T o u c h S c r e e n
The first time you power on the DPF, a calibration will be performed to set the touch screen sensors. Wait until the calibration is completed before
touching the screen or pressing a key on the remote control.
If for any reason your touch screen is not functioning correctly, perform a re-calibration to reset the touch screen sensors.
Note: The most common reason for the need to re-calibrate is if you have changed your power adapter.
There are two methods available for performing a calibration:
Setup Menu
From the screen
HOME
1. On the

Calibrate Touch Screen

2. Select
3. Wait until the calibration is completed before touching the screen or pressing a key on the remote control.
During a power-on
1. While pressing the
2. Wait until the calibration is completed before touching the screen or pressing a key on the remote control.
F r e q u e n t l y A s k e d Q u e s t i o n s
Q: How do I set up my DPF?
A: Plug the power adapter into the DPF and into a standard wall outlet, and then power it on. A Touch Screen sensor calibration will be
performed, and then you will select the desired language for your user interface display. A slideshow will begin displaying the images pre-
loaded in the internal memory. To view your own photos, insert a memory card or USB flash drive into the appropriate card slot or USB
port on the side of the DPF. Select
Q: What memory cards can the Digital Photo Frame Read?
A: Compatible memory cards include: Secure Digital™ (SD), Compact Flash (select models), MultiMedia Card™(MMC), xD Card, Memory
Stick™(MS), MemoryStick Pro™, and Memory Stick Pro Duo™.
Q: I set up the Digital Photo Frame; why won't it turn on?
A: The power adapter may not be securely connected to the DPF or the power switch may not be in the ON position.
Q: Why doesn't the screen respond properly to my touch?
A: If for any reason your touch screen is not functioning correctly, perform a Touch Screen calibration to reset the touch screen sensors.
(Refer to Calibrate Touch Screen on page 23)
Q: I have a memory card in the DPF; why can't I view my photos?
A: A) Be sure that the memory card is one of the formats listed above and that the files on the card are JPEG images files. Some digital
cameras save images in other formats. Refer to your camera's user guide if your photos are not JPEG files.
B) Make sure the memory card is inserted all the way into the card slot.
HOME
C) On the
Cancel
source. Touch
displaying your photos.
Q: Why is the photo display slower with some photos than others?
A: Higher resolution photos load more slowly. Try using lower resolution photos or down scaling your images. Refer to your camera's
operating user guide for details on down scaling your photos.
Q: Can I insert multiple memory cards?
A: Yes, you can insert multiple cards at the same time, depending on slot availability. Use the '
media source for immediate viewing/listening.
Q: Does the DPF have built-in (internal) memory?
A: Yes. The memory size varies by model.
Q: Does the DPF support all JPEG and Motion JPEG files?
A: No. The DPF only supports JPEG and Motion JPEG files taken from a digital camera. The DPF may not read all image files downloaded
from the Internet or from other software graphic applications.
Q: Can I add my own cookbook or recipes to the Recipes feature?
A: No. If you want to create .jpg files of your recipes using your own graphics editing software, you can copy the .jpg files to your memory
source and then you could view them on the DPF in
Q: Which wireless Wi-Fi USB adapter can I use with my DPF, and where can I obtain one?
Use only a Pandigital Wi-Fi adapter which is available for purchase on our website at: http://www.pandigital.net.
A:
Q: Where do I obtain a Bluetooth adapter to use with my DPF?
A: You can purchase any brand of Bluetooth adapter from any retail outlet that sells them.
screen, touch or press
MENU
.
button on the unit's back top panel, power the DPF on, and then release the
EXIT
Start Slideshow
MENU
screen, touch or press
EXIT
or press to return to the
Setup Menu
to display the screen.
from the memory card option screen.
Setup
to display the screen. Select
HOME
screen and then select the
PHOTOS
mode.
button.
EXIT
Select Media Source
, and then select the desired media
PHOTOS
PLAY
- button. The slideshow should begin
Select Media
' function to select the desired
23