Page 1
User Manual Swifty Rehabilitation Buggy Thomashilfen K i n d e r - Reha...
Page 2
Should you have any questions or encounter any problems, please contact either us directly or your specialist dealer. Our address: Thomashilfen für Behinderte GmbH & Co. Medico KG Walkmühlenstraße 1 D - 27432 Bremervörde phone: +49 (0) 4761 / 886-68 or -63 www.thomashilfen.com...
To avoid the danger of choking, please keep plastic packing materials out of reach è of your children. The buggy is suitable for carrying one child only. è TIP: More information on our rehabilitation buggies is available on our website at www.thomashilfen.com...
Folding Unfolding Take hold of the buggy by the top side of the push bar and firmly pull it open (the sliders will lock audibly into place). Fold up the side plates of the seat to an upright position so that they lock securely into place. If the side plate’s locking pin does not lock into place automatically, give the head of the pin a slight turn.
Adjustment options Seat depth Unscrew the front Allen screws (3 mm) on the seat surface, pull out the seat plate towards the front of the buggy and then re-tighten the Allen screws. TIP: To make setting the seat depth easier, grasp the front edge of the seat surface with one hand while pressing your other hand against the bottom centre of the backrest.
H-belt The Swifty rehabilitation buggy is supplied with a H-belt as standard. To adjust the length of the belts, unzip the padded section of the belts then set the length as required. Opening the belt fastener To open the H-belt, hold down the red button (1), open the clip connector (2 and 3) and release the belt (childproof safety catch).
Transporting The Swifty can be folded for transport in the luggage area of a vehicle. The Swifty has been successfully impact tested against international standard ISO 7176/19 and ANSI/RESNA WC/Vol.1 – Section 19 6/22/99 Draft and may be used as a vehicle seat. IMPORTANT: When used as a vehicle seat the following instructions must be followed.
Fitting the occupant restraint system: 1. The pushchair passenger must be restrained using an approved vehicle safety belt. Thomashilfen recommends the use of either a split reel double inertia seat belt or a 3-point occupant restraint system. (Such restraints are manufactured by Unwin Safety Systems and Q’Straint)
Cleaning and care instructions Hook and loop fasteners To ensure that the hook and loop fasteners continue to function efficiently, clean them occasionally using a brush. Always try to keep the fasteners closed during washing. Chassis The powder-coated aluminium frame can be cleaned using standard household cleaning products.
All parts are subjected to a final inspection. Thomashilfen offers you a guarantee of 3 years from the date of purchase for all chassis parts. This guarantee covers all claims affecting the functionality of the product. Damage due to improper use (e.g.
Page 12
Member of the International Support Association for the Rehabilitation of Children and Youths e. V. Walkmühlenstraße 1 · D - 27432 Bremervörde · phone +49 (0) 4761 / 886-68 or -63 www.thomashilfen.com · info@thomashilfen.de...
Need help?
Do you have a question about the EASyS Swifty and is the answer not in the manual?
Questions and answers