To Reposition The Dials On Target And Tactical Models - Leupold FX-3 Owner's Manual

To reposition the dials on Target and Tactical models:

1 . Loosen the set screws that surround the top of the knob until
the cylinder turns freely .
2 . Move the cylinder dial by hand to align the zero with the white
perpendicular mark at the base of the cylinder .
3 . Tighten the set screws until the cylinder is secure .
Target-style dials can be adjusted to the new zero position by loos-
ening the set screws, rotating the dial, and tightening the
set screws.
23