User Advanced Programming - Danfoss TP7001 User Manual

3.0 User Advanced Programming

Important: The thermostat has been set in the factory to suit most
situations, however, there are additional optional settings which can
improve the comfort, convenience and energy eff ectiveness of your
thermostat. These are set in the User Advanced Programming and
Installer Advanced Programming modes.
To access User Advanced Programming
Press and hold the V and PROG buttons for 3 seconds. This will put
the unit into User Advanced Programming. Use + and - buttons to
scroll backwards and forwards between options then Λ or V buttons
to change option settings. The fl ashing digit on the right hand side of
the display indicates the number of the selected option.
Option 1 - Enable or Disable A/B Programming
This enables or disables the A/B programming option.
Press + until Option 1 is displayed, use Λ or V to select
required setting. This option will only be possible if
Option 41 under advanced installation is set to 5+2.
0 = Disabled. Operates as 5/2 day (Factory Setting)
1 = Enabled. Activates A+B programming
Option 2 - Enable/Disable Advanced Copy
This option enables or disables the Advanced Copy
Functionality. Press + until Option 2 is selected, use Λ
or V to select required setting.
0 = Copy function copies yesterday's events into today
(Factory Setting)
1 = Copy function can copy any day into any other
day
Danfoss Heating
GB
23