Installer Advanced Programming Options; Service Interval Timer; Entering Installer Advanced Programming Mode - Danfoss TP9000 Installation Manual

2.0 Installer advanced
programming options
TP9000 incorporates a number of advanced features which can be set
by the user. These are accessed via a User Advanced Programming
Mode, please refer to User Advanced Programming in the user
instructions for details (see page 23)

2.1 Installer advanced programming options

TP9000 incorporates an additional number of advanced features
which can be set by the installer to improve the operating effi ciency
of the system and where required, to change the user functionality
of the product. These are accessed via an Installer Advanced
Programming Mode. These settings are optional and need only be
made if there is a demand for the enhanced functions.

2.2 Service Interval Timer

Instructions on how to access this feature are available from our
customer support desk. Please note these are only issued to boni-fi de
Heating installers.
2.3 Entering Installer Advanced Programming
Mode
To access the Installer Advanced Programming Mode follow the
steps below:
a) Press and hold
to enter User Advanced Programming, the
display will change to fi gure opposite.
b) Press and hold
to enter Installer Advanced Programming, the
display will change to fi gure opposite.
Danfoss Heating
V
and PROG for 3 seconds
V Λ
, and PROG for 5 seconds
GB GB
PL
GR
ES
9