Sharp MX-M264U Service Manual page 127

Item/Display
K COLOR PUSH :
TEXT/PRINTED PHOTO
L COLOR PUSH : TEXT
M COLOR PUSH :
PRINTED PHOTO
N COLOR PUSH :
PHOTOGRAPH
O COLOR PUSH :
TEXT/PHOTO
P COLOR PUSH : MAP
48
48-1
Purpose Adjustment
Function (Purpose) Used to adjust the scan image magnifica-
tion ratio (in the main scanning direction
and the sub scanning direction).
Section
Operation/Procedure
1) Select a target adjustment item with scroll key on the touch
panel.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value is saved.
When the adjustment value is increased, the image magnification
ratio is increased.
A change of "1" in the adjustment value of item A, C, or E corre-
sponds to a change of about 0.02% in the copy magnification ratio.
A change of "1" in the adjustment value of item B, D, or F corre-
sponds to a change of about 0.1% in the copy magnification ratio.
Item/Display Content
A CCD (MAIN) SCAN main scanning
magnification ratio adjustment
(CCD)
B CCD (SUB) SCAN sub scanning
magnification ratio adjustment
(CCD)
C SPF (MAIN) RSPF document front surface
magnification ratio adjustment
(Main scan)
D SPF (SUB) RSPF document front surface
magnification ratio adjustment
(Sub scan)
E SPFB (MAIN) RSPF document back surface
magnification ratio adjustment
(Main scan)
F SPFB (SUB) RSPF document back surface
magnification ratio adjustment
(Sub scan)
Setting Default
Content
range value
Text print 1 - 9
(color PUSH)
Text (color PUSH) 1 - 9
Printed photo 1 - 9
(color PUSH)
Photograph 1 - 9
(color PUSH)
Text/Photograph 1 - 9
(color PUSH)
Map (color PUSH) 1 - 9
Setting Default
range value
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
1 - 99
MX-M264U SIMULATION 6 – 53
48-5
Purpose
3
Function (Purpose) Used to correction the scan image magnifi-
3
5
Section
Operation/Procedure
5
1) Select a target adjustment item with scroll key on the touch
panel.
3
2) Enter the set value with 10-key.
5
3) Press [OK] key.
The set value is saved.
When the image magnification ratio in the sub scanning direction is
adjusted with SIM48-1, and a different magnification ratio is speci-
fied, and the image magnification ratio is not satisfactory, perform
this adjustment.
When there is an error in the image magnification ratio in reduction,
change the adjustment value in the high speed mode. When there
is an error in the image magnification ratio in enlargement, change
the adjustment value in the low speed mode.
Item/Display
A MR (HI)
B MR(MID)
C MR(LO)
D SPF(HI)
E SPF(MID)
49
49-1
Purpose
Function (Purpose) Used to perform the firmware update.
50
Section
Operation/Procedure
50 1) Save the firmware to the USB memory.
2) Insert the USB memory into the main unit. (Use USB I/F of the
operation panel section.)
50
3) Select a target firmware file for update with the touch panel.
4) Select a target firmware.
50
Press [ALL] key to select all the Firmware collectively.
5) Press [EXECUTE] key.
6) Press [YES] key.
50
The selected firmware is updated.
When the operation is normally completed, "COMPLETE" is
50
displayed. When terminated abnormally, "ERROR" is dis-
played.
Item/Display
ICU (MAIN)
ICU (BOOTM)
ICU (BOOTCN)
ICU (SUB)
LANGUAGE
GRAPHIC
SLIST
PCU (BOOT)
PCU (MAIN)
FIN (BOOT)
FIN (MAIN)
Adjustment
cation ratio (in the sub scanning direction).
Scanner section
Content
Scanner motor (High speed)
Scanner motor (Reference speed)
Scanner motor (Low speed)
Document feed (SPF) motor
(High speed)
Document feed (SPF) motor
(Reference speed)
Content
case of abnormality
ICU Main section ICUM
ICU Boot section main ICUBM
ICU Boot section CN ICUCN
ICU Sub section (ARM9) ICUS
Language support data LANG
program
Graphic data for L-LCD GRAPH
SLIST data for L-LCD SLIST
PCU Boot section PCUB
PCU Main section PCUM
Inner finisher boot section FINB
Inner finisher main section FINM
Setting Default
range value
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
1 - 99 50
Error display in