Operation - Reloop RMP-2760 b Operation Manual

OPERATION

1. Power on
After making all connections turn on the power with the ON/OFF switch
-22-. The LED illuminates.
2. Load CD
Press the respective Open/Close button -1- to open the CD tray -23-. Place the
CD in the tray. Press the Open/Close button again to close the CD tray.
ATTENTION!
Do not try to close the CD tray by pushing it. This could damage the
mechanism.
3. Display
When switching on the device without a CD in the tray, the respective display
-3- indicates "NO DISC". If the CD was correctly inserted the total playing
time and the total number of tracks is briefly displayed.
D E F G
C
B
A
S Q
R P
A) Auto Cue
If the Auto Cue mode has been activated, the display reads "Auto Cue". Press
and hold the Single/Continue button -6- for one second to de-/activate this
mode.
B) Track
The three-part display indicates the number of the track currently playing.
C) Folder/Track
This display indicates if the current track or folder is a MP3-CD (MP3-CD for
folder only)
D) Play/Pause
The Play symbol shows when a track is playing. If the CD player is in Pause
mode, the display will show a Pause symbol.
E) Cue
This display is indicated as soon as the CD player is in Cue mode. If a new Cue
point is selected, the display will flash once.
F) Single
The display reads "Single". The current track is played and the player then
goes into Pause mode; "Single" no longer shows on the display as soon as
the Continue mode is activated. The entire CD is then played and the player
starts playing the complete CD again at the end of the final track.
G) MP3
If a MP3-CD is inserted into one of the drives -23- the display reads "MP3".
H I J
O
N
K
L
M
19