Advertisement
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access
the Internet in the Automatic or Manual mode. The default mode is
Automatic.
Mode
Operations
Your device will connect to the Internet automatically, and
Automatic
your clients can surf on the Internet directly.
Login the webGUI configuration page, and select Settings
> 3G Settings > Network Select > WAN Connection
Manual
Mode > Manual, and then click Connect or Disconnect.
NOTE:
If you want to modify the detailed parameters of your device, please login
the webGUI configuration page by visiting http://192.168.0.1 or http://
m.home. The default password is admin.
AP Station Mode
1.
Login the webGUI configuration page.
NOTE:
2.
Select Settings > AP Station.
Do not use the device in an enclosed environment or where heat dissipation is
3.
Set the AP Station parameters, and then click Apply.
poor. Prolonged work in such space may cause excessive heat and raise ambient
NOTE:
temperature, which may lead to automatic shutdown of the device for your safety.
You need select Wi-Fi Prior.
In the case of such event, cool the device in a well-ventilated place before turning
on for normal use.
For more assistance, please:
• Send E-mail to mobile@zte.com.cn
• Visit http://www.zte.com.cn
• Call Service Hotline: +86–755–26779999
Configuring Your PC
Follow the following steps and figures for Windows XP to configure the
Internet Protocol for your Wi-Fi connection.
1.
Right-click My Network Places, and then select Properties.
2.
Right-click Wireless Network Connection, and then select
Properties.
4.
Connect to the WLAN device.
There are two methods for your reference.
•
Input the WLAN device information in the WLAN Setting area,
and then click Apply.
•
Click More, select this WLAN device which will be listed, and
then click Connect.
5.
After the client connected to the WLAN device successfully, you can
access the Internet.
3.
Select Internet Protocol(TCP/IP), and then click Properties.
Warning and Notice
To the Owner
•
Some electronic devices are susceptible to electromagnetic
interference sent by your device if inadequately shielded, such as
the electronic system of vehicles. Please consult the manufacturer of
your device before using if necessary.
•
Operating your device may interfere with medical devices like
hearing aids and pacemakers. Please always keep them more than
20 centimeters away from such medical devices when they are
turned on. Turn your device off if necessary. Consult a physician or
the manufacturer of the medical device before using your device.
•
Be aware of the usage limitation when using your device at places
such as oil warehouses or chemical factories, where there are
explosive gases or explosive products being processed. Turn off
your device if required.
•
The use of electronic transmitting devices is forbidden in aircrafts, at
4.
Select Obtain an IP address automatically and Obtain DNS server
petrol stations and in hospitals. Please observe and obey all warning
address automatically, and then click OK to finish the configuration.
signs and switch off your device in these conditions.
•
Do not touch the inner antenna area if not necessary. Otherwise it
will affect your device's performance.
•
Store your device out of the reach of little children. Your device may
cause injury if used as a toy.
•
Do not touch the metallic parts of your device so as to avoid a burn,
when your device is working.
Using Your Device
•
Please use original accessories or accessories that are authorized.
Using any unauthorized accessories may affect your device's
performance, and violate related national regulations about telecom
terminals.
•
Avoid using your device near or inside metallic structures or
establishments that can emit electromagnetic waves. Otherwise it
may influence signal reception.
iii.
End User's mishandling, misuse, negligence, or improper
•
Your device is not waterproof. Please keep it dry and store in a
installation, disassembly, storage, servicing or operation of the
shady and cool place.
Product.
•
Do not use your device immediately after a sudden temperature
iv.
Modifications or repairs not made by ZTE or a ZTE-certified
change. In such case, it will produce dew inside and outside your
individual.
device, so don't use it until it becomes dry.
v.
Power failures, surges, fire, flood, accidents, actions of third
•
Handle your device carefully. Do not drop, bend or strike it.
parties or other events outside ZTE's reasonable control.
Otherwise your device will be damaged.
vi. Usage of third-party products, or usage in conjunction with
•
No dismantling by non-professionals and only qualified technicians
third-party products provided that such defects are due to the
can undertake repair work.
combined usage.
•
Operating temperature range of 0°C ~ +35°C and humidity range of
vii. Any other cause beyond the range of normal usage intended for
5% ~ 95% are recommended.
the Product.
End User shall have no right to reject or return the Product, or receive a
Using Battery
refund for the Product from ZTE under the above-mentioned situations.
•
Do not short-circuit the battery, as this can cause excessive heat and
•
This warranty is End User's sole remedy and ZTE's sole liability
fire.
for defective or nonconforming items, and is in lieu of all other
•
Do not store battery in hot areas or dispose of it in a fire to avoid
warranties, expressed, implied or statutory, including but not
explosion.
limited to the implied warranties of merchantability and fitness for a
•
Do not disassemble or modify the battery.
particular purpose, unless otherwise required under the mandatory
•
When not using the battery for a long period, remove it from your
provisions of the law.
device and store it in a cool dry place.
Limitation of Liability
•
Never use any charger or battery damaged or worn out.
•
Return the wear-out battery to the provider or put it in the appointed
ZTE shall not be liable for any loss of profits or indirect, special, incidental
recycle place. Do not put it in familial rubbish.
or consequential damages resulting from or arising out of or in connection
WARNING:
with using of this product, whether or not ZTE had been advised, knew
If the battery is broken, keep away from it. If it taints your skin, wash your
or should have known of the possibility of such damages, including, but
skin with abundant fresh water and ask doctor help if necessary.
not limited to lost profits, interruption of business, cost of capital, cost of
substitute facilities or product, or any downtime cost.
Limited Warranty
•
This warranty does not apply to defects or errors in the Product
caused by:
i.
Reasonable abrasion.
ii.
End User's failure to follow ZTE's installation, operation or
maintenance instructions or procedures.
Troubleshooting
Problem
Suggested Solution
Can not establish
•
You need to install the software. Run the installation
the USB connection
program in path of My Computer > ZTEMODEM.
between your
•
If the driver of your device is abnormal, please reinstall the
device and PC
software. You need uninstall the software first.
•
Make sure the Wi-Fi function is active. Press the WPS
button to enable
or disable
Wi-Fi function.
Can not establish
•
Refresh network list and select the correct SSID.
the Wi-Fi
•
Check the IP address to make sure your client can obtain
connection between
an IP address automatically in the Internet protocol (TCP/IP)
your device and
properties.
client
•
Type the correct network key (Wi-Fi password) when you
connect to the device.
•
Make sure your SIM card is available.
The client
•
Change the location to find a place with good signal.
connected to the
•
Check WAN Connection mode setting.
device can not
•
Contact with your service provider and confirm your APN
access the Internet
settings.
When I use AP
•
Make sure the other WLAN device has already connected
Station mode, the
to the Internet.
client cannot access
•
Make sure that the subnet of your device and the other
the Internet.
WLAN device is different
•
Enter the correct address. The default address is
Can not visit
http://192.168.0.1 or http://m.home.
the webGUI
•
Only use one network adapter in your PC.
configuration page
•
Do not use any proxy server.
•
For the Wi-Fi connection password, please check the label
on the device.
•
Press the WPS button twice, and then the SSID and Wi-Fi
connection password appear on the screen.
About the password
•
The default password of the webGUI configuration page is
admin.
•
If you changed the password and forgot the new password,
you need to restore the device to the factory default settings.
Hide quick links:
Advertisement
