Linking driving position memory with door unlock operation
Memorized driving positions can be recalled when you unlock the
driver's door using the wireless remote control and open the driver's
door.
■
Setting the linked door unlock operation
Set the driving positions into the memory system using the "1"
or "2" buttons. (→P. 70)
Turn the engine switch off then, close the driver's door.
Open one of the doors.
If a door is not opened within 60 seconds after
doors will be locked again and the alarm will automatically be set.
In case the alarm is triggered, immediately stop the alarm.
→
(
P. 116)
■
Canceling the linked door unlock operation
Close the driver's door with the engine switch turned off.
Push the SET button and the
remote control at the same time for about 1 second until you
hear 2 beeps.
1-3. Adjustable components (seats, mirrors, steering wheel)
I n f o r ma t i o n P r o v i d e d b y :
Push the "1" or "2" button and
the
button on the wireless
remote control at the same time
for about 1 second until you hear
a beep.
button on the wireless
is pressed, the
71
1