Toyota Tundra Quick Reference Manual page 591

Fuse
25 ACC
26 BK/UP LP
27 CIG
28 POWER No.1
■
After a fuse is replaced
●
If the lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (→P. 571)
●
If the replaced fuse blows again, have the vehicle inspected by your
Toyota dealer.
■
If there is an overload in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
CAUTION
■
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
●
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
●
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
●
Do not modify the fuse or the fuse box.
Ampere
Accessory meter, audio system,
rear seat entertainment system,
rear view monitor, navigation sys-
7.5 A tem, back-up lights, trailer lights
(back-up lights), multiplex commu-
nication system, power outlet, out-
side rear view mirror
10 A Back-up light, gauges and meters
15 A Cigarette lighter
Power windows, power back win-
30 A
dow
I n f o r ma t i o n P r o v i d e d b y :
4-3. Do-it-yourself maintenance
Circuit
4
569