1. Safety instructions OR SAFE AND EFFICIENT OPERATION e careful with heat and extreme temperatureAvoid exposing it direct rays of the sun or near a heating appliance. ot put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C. eep away from humidity, water and dust o not place the set in a location with high humidity or lots of dust.
Page 4
2. Introduction Thank you for choosing an Varytec Special Effects Machine. You now own a rugged and powerful state-of-the-art machine. Prior to use, w e suggest that you carefully read all of the structions. By following the suggestions found in this user manual, you can look forward...
2. Place the machine on a flat surface and remove the liquid tank cap. 3. Fill with Varytec Foam Liquid or other dealer-recom mended high-quality water-based snow or foam fluid. Any other types of fluid can damage the unit. When filled, place cap back on liquid tank.
Page 6
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for 1 hour without any harming deformation. When rigging, derigging or servicing the device staying in the area below the installation den.
Foam Liquid ill with Varytec Foam Liquid or other dealer-recommended high-quality water-based snow or foam fluid. Any other types of fluid can damage the unit. Save these instructions.